Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based
Soft / VST Instruments 11-10-2015
Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.

The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.

An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.

The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.

All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.

The package includes a mono and a stereo version for optimal CPU usage.

Main Features:

- Full featured dynamics processor: compressor, gate, limiter, expander, waveshaper with a unique two thresholds system.
- Total control over the processor: continuous peak/RMS and Opto/VCA modes selection, peak envelope shape control, depth control to limit the gain range.
- Total control over the signal: dry/wet control for parallel compression, input and side chain filters.
- Stereo or mid-side processing with multiple channels linking options.
- Post brickwall limiter or clipper.
- Optimal monitoring: dynamics response, envelopes and gain reduction real time display with zooming capability. The main compression information can be recorded as automation curves.
- Best quality: up to 4x oversampling for the best sounding quality.
- Multiple side chaining modes: a unique way to perform side chain compression, ducking, gating and much more.
- Fully configurable user interface for optimal experience.

Blue Cat Audio Standards:

- Native DSP code for optimal performance.
- Full MIDI control and automation support with silent, zipper-free parameters update, advanced response control and MIDI Learn.
- No CPU load on idle: when the plug-in is fed with silence, the processing smoothly shuts down, to optimize the CPU usage of your Digital Audio Workstation.
- Skinnable and customizable user interface with transparency management.
- Automation and MIDI output: record output parameters as automation curves or send MIDI CC messages to other plug-ins for powerful side chain effects.
- Smooth Bypass: activate/deactivate the plug-in with absolutely no noise.
- Undo/Redo.
- Full featured integrated presets manager.
- Copy/paste the plug-in's state between instances using the system clipboard.
- Any sample rate supported.

home page:

http://www.bluecataudio.com/Products/Product_Dynamics/
 

Related articles
Xfer LFOTool v156 Upd [R] MacOSX Xfer LFOTool v156 Upd [R] MacOSX
Soft / VST Instruments 15-10-2015
LFOTool is an FX utility plug-in for both Macintosh OS X® and Windows®. It empowers music producers to create tremolo, auto-pan, trance-gate, side-chain compressor simulation, and dubstep-type wobble effects with minimal effort.

Features

- LFO with customizable point+tension-curve editor, 12 graphs in a preset (switchable via MIDI notes or automation)

- up to 5 graphs simultaneously (Cutoff/Reso/Pan/Var/Volume)

- graph preset shapes from a drop-down menu, able to save your own

- can optionally send MIDI CC out to control other softsynths, effects, or external hardware which responds to MIDI CC messages.

- BPM (with optional swing) or Hz LFO rate control

- sample-accurate sync

- dozens of presets included

- both Mac OSX and Windows versions included

- 64-bit VST and AudioUnit support
Blue Cat Audio Blue Cat PatchWork Stand Alone Application v1.7.1 WiN OSX RETAiL Incl. R2R Blue Cat Audio Blue Cat PatchWork Stand Alone Application v1.7.1 WiN OSX RETAiL Incl. R2R
Soft / VST Instruments 13-10-2015
Blue Cat's PatchWork is a universal plug-ins patchbay that can host up to 64 VST plug-ins into any Digital Audio Workstation (DAW) in one instance.

It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format.

Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack's matrix. All plug-ins can also communicate with each other or with the host application using the virtual MIDI ports offered by the plug-in.

For each plug-in slot, latency compensation, presets management, undo/redo integration, and individual plug-in bypass are included for optimal operation. The plug-in also stores the position of the window for each plug-in so that the layout is restored with your session or saved with presets.

Also, sub plug-ins can be automated or controlled with external control surfaces using Blue Cat's PatchWork parameters mapping capabilities.

The plug-in is available as an audio effect or a virtual instrument so that it can be inserted on any type of track, with up to 8 audio channels.

Input and output level meters are also included to monitor the signal that is dispatched to inserted plug-ins.

V1.71 (2015/07/16)

Last loaded preset can now be saved directly from the presets menu without having to select the file.
VST: fixed latency compensation reporting in Cubase (no need to re-enable the plug-in to update the latency anymore).
AAX & RTAS: fixed feedback loop that could occur in bypass mode when the plug-in was inserted before another one.

Blue Cat Audio Blue Cat PatchWork v1.7.1 WiN OSX RETAiL Incl. R2R Keygen Blue Cat Audio Blue Cat PatchWork v1.7.1 WiN OSX RETAiL Incl. R2R Keygen
Soft / VST Instruments 11-10-2015
Blue Cat's PatchWork is a universal plug-ins patchbay that can host up to 64 VST plug-ins into any Digital Audio Workstation (DAW) in one instance.

It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format.

Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack's matrix. All plug-ins can also communicate with each other or with the host application using the virtual MIDI ports offered by the plug-in.

For each plug-in slot, latency compensation, presets management, undo/redo integration, and individual plug-in bypass are included for optimal operation. The plug-in also stores the position of the window for each plug-in so that the layout is restored with your session or saved with presets.

Also, sub plug-ins can be automated or controlled with external control surfaces using Blue Cat's PatchWork parameters mapping capabilities.

The plug-in is available as an audio effect or a virtual instrument so that it can be inserted on any type of track, with up to 8 audio channels.

Input and output level meters are also included to monitor the signal that is dispatched to inserted plug-ins.

V1.71 (2015/07/16)

Last loaded preset can now be saved directly from the presets menu without having to select the file.
VST: fixed latency compensation reporting in Cubase (no need to re-enable the plug-in to update the latency anymore).
AAX & RTAS: fixed feedback loop that could occur in bypass mode when the plug-in was inserted before another one.

Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched
Soft / VST Instruments 10-10-2015
The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ. 

Key features:

Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode
Fabfilter Pro-C 2 x86 x64 Fabfilter Pro-C 2 x86 x64
Soft / VST Instruments 29-09-2015
Incredible sound and character
FabFilter Pro-C 2 is a high-quality compressor plug-in for the most demanding engineers. Whether you need subtle mastering compression, an upfront lead vocal, that magic drum glue or deep EDM pumping: Pro-C 2 gets the job done with style!
Watch demoFabFilter Pro-C 2
Everything you need
Pro-C 2 offers eight different, program-dependent compression styles with beautiful sound and character. But there's more! Apart from the classic compressor controls, you also get smooth lookahead, up to 4x oversampling, intelligent auto-gain and auto-release, a variable knee, hold, range, external side-chain triggering, variable stereo linking and mid/side processing, all packed in a beautiful Retina user interface.
FabFilter Pro-C 2 Controls
Beautiful interface and optimized workflow
The fully redesigned interface in FabFilter Pro-C 2 offers insightful metering with real-time displays that will greatly improve workflow. The large animated level/knee display visualizes exactly when, why and how compression is applied to incoming audio. Accurate level meters show the exact peak and loudness values, while the circular side-chain input meter turns finding the perfect threshold setting into a trivial task. And the large side-chain EQ controller makes it easier than ever to filter the trigger signal any way you like.
 
Pro-C 2 Full Screen
FabFilter goodies
Of course, you also get all the usual FabFilter goodies: perfectly tuned knobs, interactive MIDI Learn, undo/redo and A/B switch, Smart Parameter Interpolation for smooth parameter transitions, an extensive help file with interactive help hints, sample-accurate automation, advanced optimization and much more!
FabFilter Pro-C 2 Help HintsKey features
Eight different compression styles, of which five are new in version 2: Vocal, Mastering, Bus, Punch and PumpingNEW
Gorgeous Retina interface, with (optional) animated level knee displays and accurate peak/loudness meteringNEW
Side-chain EQ section, with customizable HP and LP filters, plus an additional freely adjustable filterNEW
Program-dependent attack and release curves
Smooth lookahead (up to 20 ms), which can be enabled/disabled to ensure zero latency processingNEW
Intelligent Auto Gain
Hold (up to 500 ms)NEW
Custom knee, variable from hard knee to a 72 dB soft knee (to enable saturation-like effects)NEW
Auto Release
Super-fast attack times
Up to 4x oversamplingNEW
Variable stereo linking and mid/side processing, with mid-only, side-only, M > S and S > M processing.
Audition Triggering option, which enables users to hear on which parts of the audio Pro-C 2 is triggering and how much compression is taking placeNEW
Multiple interface sizes: Small, Medium and LargeNEW
Range setting, which limits the maximum applied gain changeNEW
Mix setting, which scales the gain change from 0% to 200%NEW
Full Screen mode, offering a large level display and side-chain EQ controllerNEW
Accurate, large level and gain change meters, with peak and loudness level visualization. The loudness level complies with the Momentary mode of the EBU R128 / ITU-R 1770 standardsNEW
Retina support on OS X and High DPI support on WindowsNEW
External side chain triggering
GPU-powered graphics acceleration
Stereo and mono plug-ins available
Optional MIDI triggeringNEW
Supports common Pro Tools hardware control surfaces
MIDI Learn
Undo/redo and A/B comparison
Smart Parameter Interpolation
Sample-accurate automation of all parameters
Extensive help file with interactive help hints
Available in VST, VST3, Audio Units, AAX Native and AudioSuite formats (all both 64-bit and 32-bit), as well as RTAS (32-bit only)
Blue Cat's Dynamics v4.0 MAC OSX-Kleen Blue Cat's Dynamics v4.0 MAC OSX-Kleen
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.
The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.
An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.
The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.
All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.
System Requirements Mac OS X:

An Intel processor.
Mac OS X Yosemite (10.10), Mavericks (10.9), Mountain Lion (10.8), Lion (10.7), 
Snow Leopard (10.6), or Leopard (10.5).
Any VST / Audio Unit (32/64-bit) / RTAS / AAX compatible application.