XILS-lab XILS3 v2.0.2.CE
Soft / VST Instruments 12-04-2016
XILS-lab XILS3 v2.0.2.CE
The XILS 3 V2.0 not only emulates the Synthi ( VCS 3 ) modular synthesizer, it also adds an emulation of the 256 Analog Sequencer, the natural companion of the VCS 3.

Is that all ? No, of course, we added a SECOND Matrix, with 2 additional envelopes, one LFO, a detailed Sample and Hold module, and a Voltage processor …

And some input modules : Gate, Transient, Envelope Follower and Pitch Tracker to transform the XILS 3 into an advanced Effect Processor !

This means hundreds of additional connections. Add to the pile the analog chorus with its three modes, the analog delay and the phaser ... the picture emerges.

In the XILS 3, you can connect everything with everything, and you get more than 800 possible different connections per patch ( ‘Only’ 583 simultaneous connections possible ).

Did we say at Audio Rate ?

An endless source of inspiration for those who want to go deep into the heart of Analog Modular Synthesis.
It’s nearly impossible to summarize what the XILS 3 can do, but, in short, here’s the list of the main modules :

6 Oscillators grouped in 3 pairs, with WaveShaping (on sine wave, saw, triangle and square)
1 Noise Oscillator ( With Noise color )
1 Analog Filter, Non Linear and zero delay Behaviors, with 3 Modes (12/18/24 dB LowPass)
3 Trapezoidal Envelope Generators, Looping EG in the time of analog (Switchable to ADSR )
2 Polyphonic LFOs ( including 1 Oscillator acting as LFO at audiorate )
Polyphonic Ring Modulator
2 independent outputs feeding the Stereo Bus, each with one analog Lp/Hp filter
Programmable Joystick Vector Controller ( up to 32+32 modulation targets )
Polyphonic Sequencer with 3 independent lines, Slew rates, 3 recording modes.
Sequencer can behave as modulation source.
Pitch Tracker, Envelope Follower, Transient, Gate, Sample & Hold Modules
Chorus, Delay, Spring Reverb
6 Play modes (including Unison 2/4/6 ), Polyphonic and mono Portamento/Glissando/Legato, 2 different Keyboard Scaling, Polyphonic Aftertouch and VCA handling.
Hundreds of presets made by worldwide famous Sound Designers
Preset Database Engine ( Find the right patch in a flash, create your own tags )
Comprehensive manual with a getting started and tutorial sections
Instrument or Effect plug-in

home page:

https://www.xils-lab.com/pages/XILS%203.2.html
Related articles
XILS-lab polyKB II v2.1.5.CE XILS-lab polyKB II v2.1.5.CE
Soft / VST Instruments 12-04-2016
The PolyKB captures the sound and spirit of the legendary RSF PolyKobol Analog synthesizer, including one of its most stunning features : A continuous morphing Oscillator, which can be fully modulated by many sources.

This alone would set it apart from all the other common analog synth recreations, but it wouldn’t be a XILS-lab instrument if it didn't have some innovative and powerful expression tools on board.

Three different Modulation Matrix tools, including our powerful exclusive PolyMYX (Polyphonic Modulation YX pad ), which will make each note played on the PolyKB unique.

The Stereo scene can be controlled by a state of the art Unison mode, combined with the exclusive DynaMYX (Dynamic stereo Modulation YX pad). Get the total control on your Stereo Scene for impressive pads or leads, and even add a little randomness to get sophisticated acoustic spaces. Move the voices through the stereo the scene. You have never had so much artistic control over the stereo field.

A revolutionary 8 part Polyphonic Sequencer, with live recording, velocity editing and a sophisticated Step Play mode. ( Useful for live chord pattern playing )

Of course you can mix all the above to achieve spectacular instruments, arpeggios or sequences. Add to this


Two aliasing-free oscillators with smooth continuous morphing abilities

A 4 pole Low Pass filter with delicate to full screaming but always pleasurable resonance ( Self oscillation capable )

Two syncable multi featured LFOs with advanced modulating features and two ADSR envelopes.

Ability to assign Midi CC to ALL parameters for a complete control.

One arpeggiator, A vintage chorus and delay on board, a Midi Synced S&H.
XILS-lab miniSyn'X v2.0.1 CE AAX RTAS VSTi-V.R XILS-lab miniSyn'X v2.0.1 CE AAX RTAS VSTi-V.R
Soft / VST Instruments 12-04-2016
The miniSyn’X emulates with the highest level of accuracy an Italian Beauty of the 80’s. One of the last specimens of the 80’s polyphonic analog monsters.

The golden Age of DCO and VCF
Like its ancestor, it combines punchy and clear DCOs (Digital Controlled Oscillators) with cutting analog multimode filters: the unique sound of an era.

Simple, Flexible, Powerful : Splits, Layers and Singles Patches
Like its instigator, the miniSyn’X combines 2 independent synth engines in a disarming clear one panel view, enabling you to build thick or complex stacks, captivating split sounds in a flash, as well as classic analog single sounds.

Layers can benefit from the same rich sounding double analog BBD Chorus found on the original model, once again very closely emulated. And the stunning original Glide section is here too.

Mini in the name, and in the price. Maxi in the sound, and possibilities
Due to its duotimbral native architecture, the miniSyn'X is very versatile, and offers any patches from raw analog sounds, to silky complex evolving pads.

It’s a Xils. So we added a lot of things the venerable ancestor could not do: Cumulative Oscillator waveforms, cumulative LFO waveforms, an Intelligent Patch Creation system, an enhanced 4 part polysequencer, some clever stereo scene control, polyphony handling per engine, Gang Mode Editing, an enhanced Joystick, and a large library of presets.

New Technological breakthrough:
The miniSyn’X uses the exclusive 0 Delay Feedback PWM algorithm recently developed by Xils-Lab, that greatly improves the quality and perception of patches using PWM (Like the legendary Laser Harp sound)

Inspiring to operate, easy to program, gorgeous to play, and …. thoroughly automatable
On top of that, we added some adaptive UI/GUI design, so that you only see the controls you need at a time, making the MiniSynx a breeze to control and program, with solo modes for each synth engine, simple and effective layer control functions.

And a bit of AI, to make patch creation a joy (Exclusive Smart Load function in Double and split mode will guarantee you’ll quickly generate a good percentage of useful and rewarding patches created on the fly)

And finally, every miniSyn’X parameter, from filter and oscillators to the sequencer track mute buttons and gate control is automatable via Midi CC. Paradise for those who like to push automation beyond limits.

The miniSyn’X in short
Two synth engines that can be combined in 3 modes (Double, Split, Single )
Single Panel GUI for each Synthesizer engine
Up to 10 Oscillators per patch (Cumulative OSC technology, 2 x 5 )
Modelled DCO Oscillators, PWM for each waveform, 0DF PWM Algorithm
Multimode analog Filter using 3rd gen 0DF Filter technology (up to 2 per patch )
Modelled Ultra Fast Envelope Generators (up to 4 per patch )
Smart Load TM exclusive technology to create new interesting sounds quickly
Gang Edit in Double and Split mode
All parameters automatable via Midi Cc control (including Sequencer parts )
Three mode BBD Analog Chorus Unit
Only Serial Protected
XILS-Lab Syn'X v2.0.2.CE AAX RTAS VSTi-V.R XILS-Lab Syn'X v2.0.2.CE AAX RTAS VSTi-V.R
Soft / VST Instruments 10-04-2016
Syn’x 2 is a Polytimbral Synthetizer inspired for the synthesis part by a legendary Italian Synthesizer from the 80's, while its multilayer card based architecture is inspired by sophisticated hardware analog monsters like the Oberheim Matrix 12.

The Sound : It offers the striking combination of clear and punchy DCOs with cutting multimode modeled analog filters like it’s ancestor, one of the last Vintage Polyphonic Analog Synthetizers, and a piece of Synthesis history, including the famous BBD Chorus !

And because it’s multitimbral, you can use up to 16 oscillators, 8 0df Analog Filters, 32 DADSR envelopes and Modulation Matrixes addressing any of the 132 possible destinations to build your own patches, when the 300 Factory Library Presets will be not enough

It’s a Xils-Lab synthesizer, so we added MORE. To name a few : 

Oscillators with cumulative waveforms (Up to 40 per patch)
New 0DF PWM/Hard Sync Algorithm
Unique Lfos with cumulative waveforms (Up to 50 per patch)
Additional D-ADSR envelopes and Modulation Matrixes (Per Layer)
Unison, 2 arpegiattors, 2 Keyboards zones, Guitar Multitimbral mode
Plethora of monophonic and polyphonic Play Modes
PolySequencer (Also acting as a modulation source) 
Easy Sound Creation with our unique Smart Load Technology
Vintage sounding effects : Chorus, Phaser, Delay, Analog EQ. True Stereo Technology.
And a dual programming environment which offers you two different edit mode ( Easy and Advanced)

The Eazy Mode enables you to benefit of a powerful, yet intuitive and streamlined programming environment similar to the miniSyn’X duotimbral synthesizer, but with the additional power of additional envelopes, LFOs, etc

The Advanced mode unleashed the total power of the Syn’X 2 to build thick, complex, and never heard patches, still with a totally revamped and fast workflow.

Making it one of the most powerful and complex Virtual Analog Synthesizer of the modern era.

Offering you the best of both worlds : Vintage Sound in a modern frame, and never seen possibilities
XILS-Lab XILS4 v1.0.3 AAX VST RTAS CE-V.R XILS-Lab XILS4 v1.0.3 AAX VST RTAS CE-V.R
Soft / VST Instruments 10-04-2016
The XILS 4 emulates a prototype that was never released, the EMS VCS4, based on two intricate and interacting VCS 3 ( Synthi) cores. We also coupled them with the famous 256 analog polysequencer

Is that all ? No, of course, we added a SECOND Matrix, offering 2 additional envelopes, one LFO, a detailed Sample and Hold module, and a Voltage processor. Then invited Velocity, Modulation Wheel, Aftertouch, and all the Midi Cc to join the party.

Which means hundreds of additional connexions. Add to that, the analog chorus with its three modes, the analog Delay and Phaser, and the picture emerges.

In the XILS 4, you can connect everything with everything, and you get more than 1140 possible different connexions per patch.

Did we say at Audio Rate ?

The XILS 4 can also be used as a powerful VST effect processor, processing incoming audio signals, so we added more –input- modules : Gate, Transient, Envelope Follower and Pitch Tracker.

An endless source of inspiration for those who want to go deep into the heart of Analog Modular Synthesis.

It’s impossible to summarize what the XILS 4 can do, but, in short, here’s the list of the main modules :

12 Aliasing free Oscillators, grouped in 6 pairs, with WaveShaping, 3*2 Hard synchronization modes, + 2 additional Noise oscillators
2 Analog Multimode Filters, Non Linear and zero delay Behaviors, with 3 Modes (6/12/24 dB)
4 Trapezoidal, looping, Envelope Generators. ( Switchable to standard ADSR )
5 Polyphonic LFOs ( including 4 Oscillator acting as LFO at audio rate )
Polyphonic Ring Modulator and VCA engine
Cascade Mode : Synthesizer 1 can feed Synth 2 engine inputs
4 independent outputs feeding the Stereo Bus, each with one analog Lp/Hp filter
2 Programmable Joystick Vector Controllers ( up to 32+32 modulation targets )
Polyphonic Sequencer with 3 independent lines, Slew rates, 3 recording modes.
Sequencer can behave as modulation source.
Pitch Tracker, Enveloppe Follower, Transient, Gate, Sample & Hold Modules
Chorus, Delay, Phaser, Spring Reverb
6 Play modes (including Unison 2/4/6 ), Polyphonic and mono Portamento/Glissando/Legato, 2 different Keyboard Scaling, Polyphonic Aftertouch and VCA handling.
700+ presets made by worldwide famous Sound Designers
Preset Database Engine ( Find the right patch in a flash, create your own tags )
Comprehensive manual with a getting started and tutorial sections
More than 100 parameters mappable to midi controllers
More than 1100 possible connexions per patch ! ! !
g200kg Kamioooka 1.0.7 g200kg Kamioooka 1.0.7
Soft / VST Instruments 1-02-2016
Kamioooka is a polyphonic Full-Modular synthesizer with patch cable system. You can freely combine modules and make patches. 10 module slots and 7 types of modules VCO/VCF/VCA/ADSR/LFO/MISC/SEQ) are available.
Available modules:

VCO : Oscillator, with PWM/FM/Sync functions.
VCF : HPF/BPF/LPF filter.
VCA : Amplifier with modulation input.
ADSR : Two ADSR Envelope Generator.
LFO : Two LFO with tempo sync mode.
MISC : Ring modulator/Noise Generator/Sample&Hold/Inverter.
SEQ : 8 Step Mini sequencer.
XILS-Lab XILS 3 LE v2.0.3 MacOSX XILS-Lab XILS 3 LE v2.0.3 MacOSX
Soft / VST Instruments 2-12-2015
Capable of producing both a very wide range of classic analog sounds, and sounds no other analog synth can do, The XILS 3 LE V2.0 cumulates an authentic emulation of the Synthi ( VCS 3 ) modular synthesizer and a replica of the 256 Analog Sequencer, its natural companion.

Add to the pile the Analog Chorus with its three modes, the analog Delay, and the vintage Spring Reverb ... the picture emerges.

In the XILS 3 LE V2.0, you can connect everything with everything, and you get more than 440 possible different connections per patch. At Audio Rate, so that each of the 6 oscillators can perform as an LFO for example.

An endless source of inspiration for those who want to go deep into the heart of Analog Modular Synthesis.
Input modules : Gate, Transient, Envelope Follower and Pitch Tracker also transform the XILS 3 LE V2.0 into a powerful VST-AU Effect Processor !

6 Oscillators grouped in 3 pairs, with WaveShaping (on sine wave, saw, triangle and square)
1 Noise Oscillator ( With Noise color )
1 Analog Filter, Non Linear and zero delay Behaviors, with 3 Modes (12/18/24 dB LowPass)
1 Trapezoidal Envelope Generators, Looping EG in the time of analog (Switchable to ADSR )
Polyphonic Ring Modulator
2 independent outputs feeding the Stereo Bus, each with one analog Lp/Hp filter
Programmable Joystick Vector Controller
Polyphonic Sequencer with 3 independent lines, Slew rates, 3 recording modes.
Sequencer can behave as modulation source.
Pitch Tracker, Envelope Follower, Transient, Gate Modules 
Chorus, Delay, Spring Reverb 
6 Play modes (including Unison 2/4/6 ), Polyphonic and mono Portamento/Glissando/Legato, 2 different Keyboard Scaling, Polyphonic Aftertouch and VCA handling.
Hundreds of presets made by worldwide famous Sound Designers
Preset Database Engine ( Find the right patch in a flash, create your own tags )
Comprehensive manual with a getting started and tutorial sections
Instrument or Effect plug-in