Bitsonic Violent MidSide Stereo Image Modifier v1.0 JUSTiFY
Soft / VST Instruments 1-04-2016
Bitsonic Violent MidSide Stereo Image Modifier v1.0 JUSTiFY
Using Mid/side Stereo Image Modifier you can freely change the sense of space, in 4 different frequency-ranges. Mid/Side mode optimalizes the audio sign. 

The pan controls are used to position a channel between the left and right side of the stereo spectrum. You can change the volume or stereo image with the delay function. Reverb function gives different reverbs to the 4 frequency-ranges.

home page:

http://www.bitsonic.eu/midsideimage.html
Related articles
Bitsonic Violent Maximizer v1.0 JUSTiFY Bitsonic Violent Maximizer v1.0 JUSTiFY
Soft / VST Instruments 1-04-2016
Using Mid-Side Maximizer you can raise the volume of the audio sign without putting it into overdrive. 

The process drops the dynamics range. The Violent Maximizer gives you full control over the volume of your audio. You can use it on master channel, and you can reach maximum volume without the drastic drop of transients. 

Using the mid-side mode, you can higher the volume even more. You can observe and change the important RMS and LUFS dB rates. The Maximizer can even be used on soloistical sounds – the Violent Maximizer isn’t agressive on transients. If you’ve ever met a „good enough” compressor-maximizer that even with small changes, lowered the transient rate drastically, then you can understand why a great compressor-maximizer is important. 

There are quite a lot of overvalued softwares on the market, with over- the-top prices - the makers tell you that „quality has a price”. We, at Bitsonic think, that this can be done with realistic prices as well. A lot of people use hacked softwares, but you have the chance to legally use Violent Maximizer’s functions, considering the low price. And even if you have no money, you can still use the demo version – with the loss of some comfort functions.
Bitsonic Custom Reverb v1.0 JUSTiFY Bitsonic Custom Reverb v1.0 JUSTiFY
Soft / VST Instruments 1-04-2016
Custom reverb was created so that the sound is as close to real life as possible, and users can choose from many different options.

TBProAudio gEQ12 v1.3.4 AAX RTAS VST3 VST CE-V.R TBProAudio gEQ12 v1.3.4 AAX RTAS VST3 VST CE-V.R
Soft / VST Instruments 14-03-2016
gEQ12 is 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes.

Today's mixing and mastering processes require a full featured but easy to use equalizer which can accurately shape the tone of a track , bus or master track. eEQ12 provides all necessary tools in one package paired with some unique features.

The display shows the spectrum curve of incoming and outgoing signal. gEQ12 has the unique feature that the outgoing spectrum is directly calculated from incoming spectrum (incoming spectrum - filter curve = outgoing spectrum). This allows you to capture the incoming signal, to freeze it and to modify then the filter curve based on the altered outgoing spectrum. The filter response is controlled by 12 individual filter bands. Each filter band has its own display handle, which can be adjusted by mouse.

gEQ12 consists of 12 stereo filter in series. Each filter can be configured individually by setting type, stereo placement (all, left/mid and right/side), slope, frequency, gain and q-factor.

gEQ12 offers 9 analog modeled and 8 digital (Butterworth) filter. The filter quality can be increased by using oversampling. This ensures "analog" filter magnitude/phase response near Nyquist frequency. On top of it gEQ12 can operate in several minimum or linear phase modes, which can lower CPU usage and makes filter phase response linear.

12 independent filter bands, extended frequency range 10Hz - 48kHz
17 filter types, analog/digital design, zero delay IIR
filter slope up to 96dB
independent stereo/left/right/mid/side processing per band
7 processing modes: zero latency, minimum/linear phase
stereo/MS processing (e.g. stereo/mono split)
sample rates up to 192 kHz
"real" over sampling, up to 4x
hi-res spectrum analyzer with 32k FFT based ISO R40 frequencies
pre/post-EQ, average/live spectrum, stereo/left/right/mid/side
narrow-band sweeping mode
spectrum freeze mode
very easy alignment of filter response curve to audio spectrum
sample exact A/B toggle for all processing modes
precise parameter input
large and easy to use GUI
interactive spectrum/EQ display
full DAW automation support, smooth filter frequency change
64-bit internal processing
very efficient CPU usage design

1.3.4
- Small fixes
- Demo scheme changed
TBProAudio gEQ12 v1.3.2 AAX RTAS VST3 VST CE-V.R TBProAudio gEQ12 v1.3.2 AAX RTAS VST3 VST CE-V.R
Soft / VST Instruments 15-02-2016
gEQ12 is 12 band stereo/MS graphic equalizer with accurate spectrum analyzer and minimum/linear phase modes. Today's mixing and mastering processes require a full featured but easy to use equalizer which can accurately shape the tone of a track , bus or master track. eEQ12 provides all necessary tools in one package paired with some unique features. 

The display shows the spectrum curve of incoming and outgoing signal. gEQ12 has the unique feature that the outgoing spectrum is directly calculated from incoming spectrum (incoming spectrum - filter curve = outgoing spectrum). This allows you to capture the incoming signal, to freeze it and to modify then the filter curve based on the altered outgoing spectrum. The filter response is controlled by 12 individual filter bands. Each filter band has its own display handle, which can be adjusted by mouse. 

gEQ12 consists of 12 stereo filter in series. Each filter can be configured individually by setting type, stereo placement (all, left/mid and right/side), slope, frequency, gain and q-factor.

gEQ12 offers 9 analog modeled and 8 digital (Butterworth) filter. The filter quality can be increased by using oversampling. This ensures "analog" filter magnitude/phase response near Nyquist frequency. On top of it gEQ12 can operate in several minimum or linear phase modes, which can lower CPU usage and makes filter phase response linear. 

12 independent filter bands, extended frequency range 10Hz - 48kHz
17 filter types, analog/digital design, zero delay IIR
filter slope up to 96dB
independent stereo/left/right/mid/side processing per band
7 processing modes: zero latency, minimum/linear phase
stereo/MS processing (e.g. stereo/mono split)
sample rates up to 192 kHz
"real" over sampling, up to 4x
hi-res spectrum analyzer with 32k FFT based ISO R40 frequencies
pre/post-EQ, average/live spectrum, stereo/left/right/mid/side
narrow-band sweeping mode
spectrum freeze mode
very easy alignment of filter response curve to audio spectrum
sample exact A/B toggle for all processing modes
precise parameter input
large and easy to use GUI
interactive spectrum/EQ display
full DAW automation support, smooth filter frequency change
64-bit internal processing
very efficient CPU usage design
2C Audio Aether v1.6.0 Incl Keygen-R2R 2C Audio Aether v1.6.0 Incl Keygen-R2R
Soft / VST Instruments 8-12-2015
Aether is an award-winning, ultimate quality, self-modulating algorithmic reverb. It is used daily in the worlds largest music, film, television, and game productions and is heard daily by millions of listeners around the world. It remains one of the industy's undisputed champions of traditional reverb design.

Effectively two plug-ins in one: ER Engine and LR Engine • Discrete Early Reflections engine with 33 Space Type Models • Unrivaled Late Reflections Engine with unique features • Attack & Sustain Envelope • Variable Q Damping Decay Curve • Proprietary Spectral Modulation
Features Image
Sublime space, both classical and modern...
• World-class GUI design that communicates critical information effortlessly • 2x & 4x Oversampling • Double Precision 64bit DSP • 64bit Host/OS Support • Band-limited Interpolation • Variable Quality Modes • Extreme Off-line Render Modes • Intelligent Space Type Macro Controls • Diverse Frequency Profile Macros • Comprehensive Preset Browser • Immediate Parameter Accessibility • Instant algorithm browsing • Mid-Side modes • Cascade Control • Complex Stereo Modes • Flexible EQ/Filter Routing • Huge Parameter Value Ranges • Comprehensive FX Presets • Complex & Clustered IRs • Late Reflections Coloration • 0-Sample Latency 

Side Notes

R2R has decided to release some of their earlier INTERNAL releases to the public today
Enjoy
SKnote XTrim Mixing Tools v1.0 AU VST MAC OSX SKnote XTrim Mixing Tools v1.0 AU VST MAC OSX
Soft / VST Instruments 19-11-2015
XTrim is a set of tools for mixing. It provides fine control on parameters related to phase, level, time, pitch, stereo image and a stereo VU meter with optional offset.

Main features:

• LeftRight channels swap.
• independent Left and Right channels phase controls.
• fine (+/-1dB) output level control with optional coarse (+/-10dB) mode (e.g. for gain staging).
• independent control on stereo panning and width (for mid/side balancing, stereo image size management, stage placement of instruments with position and size control, etc.).
• extra-smooth hi-pass and lo-pass filters for bracketing and mix balance.
• forward and backward delay control (for track alignment and control on groove) with optional left-only delay for stereo alignment and creative uses (e.g. controlling the sound of multi-tracked guitars, microphone alignment, etc.).
• fine pitch control for automated pitch correction and creative uses (e.g. psycho-acoustics on bassdrums, easy experimentation on dynamic tuning, doubling, vibrato, etc.).
• optional "chorus" mode for the pitch control (applies the same amount of pitch shifting, as set by the knob, to both Left and Right channels but with
opposite sign).
Simple and light on CPU, it can be used as a general purpose gain staging tool, as a VU metering suite or for more complex purposes.