HoRNet Multicomp Plus 1.1.2 WiN/MAC
Soft / VST Instruments 29-02-2016
HoRNet Multicomp Plus 1.1.2 WiN/MAC
HoRNet Multicomp Plus is a very high quality and versatile plugin compressor. It’s built on the foundation of the original Multicomp and features three compressor models (VCA, OPTO and FET) and an expander (based on the VCA model).

Multicomp Plus is perfect for every mixing need providing three compression colors, from the dry VCA to the very fat FET model, if you need analog warmth Multicomp Plus provides a different emulation for every model.

You don’t have to worry about gain staging thanks to the internal makeup gain algorithm and the auto input and output gain adjustment.

If you don’t like the hiss that comes with analog you can turn it off, and with the "Analog” knob you can dial the right amount of saturation.

Each model can be fed with an external side-chain, and the side-chain has two filters, a high pass and a low pass, both filters are full range, working from 20 to 20000Hz.

HoRNet Multicomp Plus features the standard attack, release, ratio and threshold controls, but brings compression to a new level providing a waveform display with both input and output signal so that is easy to monitor the processing that is taking place. Like every other HoRNet dynamics processor Multicomp Plus has a "RealGR” gain reduction meter. The meter moves at the speed of audio so you can "see” how fast the gain reduction is being applied, but the meter also has a peak hold function so that the maximum reduction applied in the last 2 seconds is always in front of you. High quality processing is guaranteed by 2 or 4 times oversampling that drastically reduces the amount of aliasing distortion generated by the compression algorithm.

A handy dry / wet knob allows you to create parallel compression with ease, the level of the wet signal is kept at the right spot by the adaptive make up gain algorithm.

home page:

http://www.hornetplugins.com/plugins/hornet-multicomp-plus/
Related articles
Cytomic The Glue v1.3.12 Incl Patched and Keygen-R2R Cytomic The Glue v1.3.12 Incl Patched and Keygen-R2R
Soft / VST Instruments 11-12-2015

The Glue is a high quality analog modeled plug-in based on a cross between an E and G series SSL 4000 buss compressor with some additional features. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. It's quick and easy to use and has an uncluttered interface.

Additions include an ultra-fast attack time of up to 0.01mS and a Range knob which backs off the compression to give incredibly natural sounding attacks and limits the maximum amount of compression applied. Also included are external sidechain support and an adjustable side-chain highpass filter.

Summary:
Accurate analog model of an SSL 4000 buss compressor.
Ultra-fast attack time of up to 0.01 mS.
Range knob to naturally control the maximum compression applied.
Peak Clip to optionally hard shape transients.

Side Notes:
R2R has decided to release some of their earlier INTERNAL releases to the public today
Enjoy
Lindell ChannelX (All) OSX Plugins-0RGan1c Lindell ChannelX (All) OSX Plugins-0RGan1c
Soft / VST Instruments 19-11-2015
The Channel X bundle contains the 3 plugins :

6X-500 preamp / filters plugin
7X-500 FET compressor plugin
PEX-500 passive EQ plugin

Key features
Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode

Compatibility
Mac

AudioUnits : 32 bits, 64 bits
VST : 32 bits, 64 bits
VST3 : 32 bits, 64 bits
AAX : 32 bits, 64 bits
RTAS
Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based
Soft / VST Instruments 11-10-2015
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.

The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.

An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.

The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.

All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.

The package includes a mono and a stereo version for optimal CPU usage.

Main Features:

- Full featured dynamics processor: compressor, gate, limiter, expander, waveshaper with a unique two thresholds system.
- Total control over the processor: continuous peak/RMS and Opto/VCA modes selection, peak envelope shape control, depth control to limit the gain range.
- Total control over the signal: dry/wet control for parallel compression, input and side chain filters.
- Stereo or mid-side processing with multiple channels linking options.
- Post brickwall limiter or clipper.
- Optimal monitoring: dynamics response, envelopes and gain reduction real time display with zooming capability. The main compression information can be recorded as automation curves.
- Best quality: up to 4x oversampling for the best sounding quality.
- Multiple side chaining modes: a unique way to perform side chain compression, ducking, gating and much more.
- Fully configurable user interface for optimal experience.

Blue Cat Audio Standards:

- Native DSP code for optimal performance.
- Full MIDI control and automation support with silent, zipper-free parameters update, advanced response control and MIDI Learn.
- No CPU load on idle: when the plug-in is fed with silence, the processing smoothly shuts down, to optimize the CPU usage of your Digital Audio Workstation.
- Skinnable and customizable user interface with transparency management.
- Automation and MIDI output: record output parameters as automation curves or send MIDI CC messages to other plug-ins for powerful side chain effects.
- Smooth Bypass: activate/deactivate the plug-in with absolutely no noise.
- Undo/Redo.
- Full featured integrated presets manager.
- Copy/paste the plug-in's state between instances using the system clipboard.
- Any sample rate supported.
Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched
Soft / VST Instruments 10-10-2015
The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ. 

Key features:

Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode
Fabfilter Pro-C 2 x86 x64 Fabfilter Pro-C 2 x86 x64
Soft / VST Instruments 29-09-2015
Incredible sound and character
FabFilter Pro-C 2 is a high-quality compressor plug-in for the most demanding engineers. Whether you need subtle mastering compression, an upfront lead vocal, that magic drum glue or deep EDM pumping: Pro-C 2 gets the job done with style!
Watch demoFabFilter Pro-C 2
Everything you need
Pro-C 2 offers eight different, program-dependent compression styles with beautiful sound and character. But there's more! Apart from the classic compressor controls, you also get smooth lookahead, up to 4x oversampling, intelligent auto-gain and auto-release, a variable knee, hold, range, external side-chain triggering, variable stereo linking and mid/side processing, all packed in a beautiful Retina user interface.
FabFilter Pro-C 2 Controls
Beautiful interface and optimized workflow
The fully redesigned interface in FabFilter Pro-C 2 offers insightful metering with real-time displays that will greatly improve workflow. The large animated level/knee display visualizes exactly when, why and how compression is applied to incoming audio. Accurate level meters show the exact peak and loudness values, while the circular side-chain input meter turns finding the perfect threshold setting into a trivial task. And the large side-chain EQ controller makes it easier than ever to filter the trigger signal any way you like.
 
Pro-C 2 Full Screen
FabFilter goodies
Of course, you also get all the usual FabFilter goodies: perfectly tuned knobs, interactive MIDI Learn, undo/redo and A/B switch, Smart Parameter Interpolation for smooth parameter transitions, an extensive help file with interactive help hints, sample-accurate automation, advanced optimization and much more!
FabFilter Pro-C 2 Help HintsKey features
Eight different compression styles, of which five are new in version 2: Vocal, Mastering, Bus, Punch and PumpingNEW
Gorgeous Retina interface, with (optional) animated level knee displays and accurate peak/loudness meteringNEW
Side-chain EQ section, with customizable HP and LP filters, plus an additional freely adjustable filterNEW
Program-dependent attack and release curves
Smooth lookahead (up to 20 ms), which can be enabled/disabled to ensure zero latency processingNEW
Intelligent Auto Gain
Hold (up to 500 ms)NEW
Custom knee, variable from hard knee to a 72 dB soft knee (to enable saturation-like effects)NEW
Auto Release
Super-fast attack times
Up to 4x oversamplingNEW
Variable stereo linking and mid/side processing, with mid-only, side-only, M > S and S > M processing.
Audition Triggering option, which enables users to hear on which parts of the audio Pro-C 2 is triggering and how much compression is taking placeNEW
Multiple interface sizes: Small, Medium and LargeNEW
Range setting, which limits the maximum applied gain changeNEW
Mix setting, which scales the gain change from 0% to 200%NEW
Full Screen mode, offering a large level display and side-chain EQ controllerNEW
Accurate, large level and gain change meters, with peak and loudness level visualization. The loudness level complies with the Momentary mode of the EBU R128 / ITU-R 1770 standardsNEW
Retina support on OS X and High DPI support on WindowsNEW
External side chain triggering
GPU-powered graphics acceleration
Stereo and mono plug-ins available
Optional MIDI triggeringNEW
Supports common Pro Tools hardware control surfaces
MIDI Learn
Undo/redo and A/B comparison
Smart Parameter Interpolation
Sample-accurate automation of all parameters
Extensive help file with interactive help hints
Available in VST, VST3, Audio Units, AAX Native and AudioSuite formats (all both 64-bit and 32-bit), as well as RTAS (32-bit only)
Synthblitz Audio DNX 03 Multiband Compressor v2.0 Hy2ro Synthblitz Audio DNX 03 Multiband Compressor v2.0 Hy2ro
Soft / VST Instruments 13-09-2015
DNX-03 is a three-band stereo Compressor (win vst plugin) inspired by the analog models,
with some added features such as noise reduction and wide stereo control for
each individual freq-band.
The DNX-03 is able to split the incoming signal into three frequency-bands using a
6dB per octave crossover.

First-order filters are considered by many audiophiles to be ideal for crossovers.

Each band is passed through a compressor and then through a stereo processor
where compression,gain and stereo image can be altered and improved.
The outputs of the compressors and processors are then re-combined and
fed to the master output.

News V2.0

New compressors inside
New parameters for compression
New saturation system
New shortcuts
New Fine and Ultrafine Control for Knobs (improve controls for mastering session)
Four modes of operation
New Frequency band parameters (now 33Hz to 18.000Hz - full control sub and super-high)
New Vu Meter (virtual coil) over 6dB
New LED Meters (large scale) for reduction
New Vu Meter LED for output (large scale) over 8 dB
New numerical meters for dB RMS