Cakewalk Z3TA Plus v2.2.2.120 Incl Keygen-R2R
Soft / VST Instruments 15-02-2016
Cakewalk Z3TA Plus v2.2.2.120 Incl Keygen-R2R
The legendary waveshaping sound of Z3TA+ (zay'-ta) is back - and better than ever. New filters, modulatable waveshapers, flexible effects expressive control and a gorgeous new interface make Z3TA+ 2 one seriously powerful synth.

Waveshaping Synthesis:
Ultimate waveshaping control with dozens of sonic tools
Intuitive and graphically responsive interface
2,000+ professionally crafted presets
Built-in fully customizable studio quality FX.

Oscillators Section:

32-bit wavetable synthesis with three interpolation modes (DRAFT, NQ, HQ).
Full Stereo processing.
6 Oscillators, 60 built-in waveforms, 10 user loadable waveforms, PWM capable in all oscillators with any waveform.
Loadable Wavetable Sets: Programs using different wavetable sets can be mixed in a bank. z3ta+ will find and load the appropriate wavetable set when the program is selected on-the-fly.
Loadable Oscillator USER Waveforms: z3ta+ can load the USER oscillator waveforms 1 to 6 from standard wave files (.wav). Up to six individual waveforms can be loaded per program, and then transformed by using the shaper as the internal waveform set. It is possible to load different waveforms in each preset. z3ta+ will find and reload the used waveforms when the program is selected on-the-fly. The wave files must be mono, up to 64k samples, in any samplerate.
64 voice polyphonic (CPU dependant) with polyphony limiter and Intelligent Voice Allocation (no clicks when maximum polyphony is exceeded).
Full Stereo processing.
6 Oscillators, 60 built-in waveforms, 10 user loadable waveforms, PWM capable in all oscillators with any waveform.
Independent Waveshaper for each oscillator with 14 wave transformations: WARP, TWIST, MULTIPOINT, WAVE, SYMMETRY, DRIVE, WAVE, OFFSET, SHRINK, SELFSYNC, BIT REDUCTION, HIPASS and LOWPASS filters, , DC-OFFSET and WINDOW, all fully band limited and real-time capable.
Full Legato mode when operation is monophonic.
Circular inter-oscillator modulation.
Ring modulation, Hard Sync, PM and FM modes for any oscillator.
MULTI mode for any oscillator, which turns any oscillator in 8 oscillators (4 stereo oscillators) with adjustable detune.
Octave (-5 to +5 oct), Transpose (-12 to +12 semi), Detune (-50 to +50 cent) and Phase (0 to 360 deg) controls for each oscillator.
Key sync and Free Running, Normal or Inverted, with or without keyboard tracking modes for any oscillator.
Main Transpose, Main Tune controls.
Oscillator random tune control with per-oscillator generator.
Adjustable Punch control (drum machine-like DC burst).
Individual settings for Pitch Bend Up and Down (-12 to +12 semi).
4 Pitch Bend modes: Normal, Up, Down and Hold notes.
4 monophonic/polyphonic Portamento modes: Normal and Fingered, Fixed and Variable time.
Two mixing busses for oscillators outputs.
Individual Level/Modulation amount control.

Filters Section:

2 Filters, 10 Filter Modes: 12dB/oct LPF/HPF/BPF/BRF, 24dB/oct LPF/HPF/BPF/BRF, 36dB/oct LPF, formant.
Individual Cutoff, Resonance, Resonance Boost, Pan, Level and Limiter controls for each filter.

LFO Section:

6 Morphing capable LFOs, 4 global, 2 local (per-voice), all host Tempo Sync capable.
60 Waveforms, 10 user waveforms.
Individual Offset, Delay, Fade In, Morph Time, Speed, Tempo Sync and Key Sync mode controls.
10 LFO combination modes: MORPH, ADD, IADD, SUB, ISUB, MUL, MIN, MAX, HALF1, HALF2.

EG Section:

Eight 6-stage envelope generators, 1 bipolar, 6 unipolar, 1 main Amp EG, all with adjustable positive or negative amount.
Individual Delay, Attack Time, Slope Time, Slope Level, Decay Time, Sustain Level, Release Time controls.
Individual Attack, Slope, Decay and Release shape controls with 3 shapes (linear, slow, fast).

Modulation Matrix:

16 row modulation matrix with Source, Range (min/max), Curve, Control and Destination options.
24 modulation sources, including all LFOs, EGs, Attack and Release velocity, Unipolar and Bipolar keyboard tracking, internal functions and polyphony.
Min and Max modulation adjustable.
12 modulation curves, including Linear, Slow, Fast with normal and reverse polarity, and four pitch curves.
Over 200 modulation controls, including all EGs, unipolar and bipolar Pitch Bend, channel and polyphonic Aftertouch, Modulation Wheel, Breath, all MIDI CCs, velocity, unipolar and bipolar keyboard tracking, audio input and X-Y pad.
Over 60 destinations, including Pitch, PW, Levels, Routing, Pan, LFO and EG parameters, Functions, and many FX parameters.

Effects Page

Drive Section:

6 Drive modes, including Soft/Hard drive, Valve Amp, Smart Shaper and Heavy Metal (local plus global drive stage), individually selectable for both filters.
Stereo Decimator (lo-fi).
Tone, Drive and output Level controls.

Modulation Section:

9 Mode Modulation section, full stereo operation (except when mono modes are selected).
Modulation speed sync'able to host Tempo.
3 modulation waveforms.
Broad range of Chorus, Flanger and Phaser effects available, including mono/stereo chorus, flanger and phaser, 6-voice chorus, Quad phaser.
Delay, Speed, modulation Depth, Feedback, 2-band Modulation Equalizer with selectable modes and Level controls.

Compressor Section:

3 Mode dedicated compressor, with Threshold, Ratio, Gain and output Level controls.
Delay Section.
3 individual stereo delay lines, with Time (L & R), Delay, Feedback and Level controls.
Multi mode 3-band EQ inserted in the feedback loop, with 6 EQ modes.
Tempo Sync capable.

Reverb Section:

Full stereo reverb.
4 Reverb modes, including Small Room, Mid Hall, Big Hall and Plate.
Size, Damp, Lo, Hi and Wet/Dry controls.

Eq Section:

Full stereo eq.
7 band equalizer with 11 equalizer modes (Wide 1/2/3, Half 1/2/3, Low, Lo/Mid, Mid, Mid/Hi, Hi).
Simulator Section.
Stereo Cabinet-Amp simulator, with 19 different preset simulations.

Main Effect Section:

Stereo Main Limiter.

Graphic User Interface:

2 page, 3 deployable windows (Shaper, X-Y Pad, Spectral Analyzer), several subsections display.
Graphics by bitplant.
Inertial sliders, menu-driven multi lists, fast page selectors.
Sound Preview ribbon at bottom, variable velocity (y position), MIDI transmit to host (VST).
Polyphony indicator.
Master Volume and Limiter controls, output VU meter.
Full mouse wheel support.
Focus-capable controls, full PC-Keyboard support.

X-Y Pad:

Deployable X-Y pad with random mode via right-click, assignable as CONTROL in the modulation matrix.

Programs / Banks:

Bank and Program selector, Program up/down, Program Name display/editor.
6 banks (A-F), 768 program capacity, 128 factory presets.
Saves and Loads standard.fxb and.fxp files.
Compressed bank file format, to save space in song/bank files.
All settings saved in the song.
Copy/Paste/Initialise program utilities.
Auto-load of Default file, utility to save Default File.

MIDI Learn:

All controls are MIDI Learnable, with adjustable min/max/reverse status via right-click.
Multiple MIDI CC#'s are possible to be assigned to same control, multiple controls can be attached to one MIDI CC#.

home page:

http://bit.ly/1QfxqBk
Related articles
discoDSP Phantom v1.2-DVT discoDSP Phantom v1.2-DVT
Soft / VST Instruments 8-01-2016
Phantom is an eight voice, four operator, PM/FM synthesizer with the ability to import Yamaha DX100, DX27 and DX21 SysEx data.

General:

Eight voices / Four operators phase/frequency modulation synthesizer.

Operators:

Key and velocity scaling.
Initial phase (with free-run support).
Phase modulation self-feedback amount.
Tune (Frequency ratio).
Octave shift.
Amplitude LFO and AD1SD2R envelope.

Program:

Eight Operator routing algorithms.
Customizable pitch bend range.
Global velocity modulation/amplitude sense.
Glide with auto-on-legato mode.
Full mono/legato/polyphonic operation.
Pitch LFO and AD1SD2R envelope.
4-Pole resonant filter (Low pass, Hi pass, Band pass, Reject modes).
Filter LFO and AD1SD2R envelope.
Built-in stereo multi effects unit with chorus, delay and reverb.
Pitch bend / Mod wheel controller.

Extras:

Yamaha DX100/DX27/DX21 SysEx data import.
Includes 128 presets.
Lifetime free updates for registered users.

System Requirements:

2 GHz CPU recommended for full polyphony.
Beepstreet Sunrizer 1.2.2 MERRY XMAS-NeBULA Beepstreet Sunrizer 1.2.2 MERRY XMAS-NeBULA

A classic with a twist
Sunrizer is built upon a familiar subtractive synth design – but with a distinct character and a host of unique features. It starts with two oscillators and two sub-oscillators that deliver all of the basic waveforms and a perfect emulation of JP-8000 "supersaw", with pulse width, frequency and ring modulation plus a lush unison mode.

Master of effects

Sunrizer has a very flexible effects section which boasts an input crossover filter that lets you apply them only on a specific part of the spectrum. There is a total of four effect modules – the first includes silky-smooth chorus, phaser and rotor algorithms alongside distortion, followed by stereo delay, two-band equalizer and a spacious and highly tuneable reverb. Yet with all this power Sunrizer still keeps the processor load low, thanks to heavy code optimizations.

Powerfully live

Where the Sunrizer’s sound engine ends, the fun only starts. First off, each patch has two sets of parameters and the synth lets you morph between them – as smoothly or as wildly as you wish. Sunrizer also sports an arpeggiator that has fully programmable sequences and supports per-note transposition and randomization – together with chord memory it allows you to create elaborate yet finely controllable single- or multi-finger passages. 

Polished simplicity

Despite such an extensive feature list, Sunrizer has a single-screen design with finely crafted graphics that especially look gorgeous on Retina screens. All of its building blocks are logically arranged and easily accessible, with each individual parameter carefully calibrated. This lets Sunrizer give you a mix of utter pleasure and great productivity that is lacking in most unnecessarily overcomplicated synths.

Specifications

•Bespoke synth engine with 24 voice polyphony and very low processor load.
•Two oscillators with multiple waveform types, hard-sync, pulse width modulation.
•Oscillator mixer with ring modulator and separate noise source.
•Per-oscillator unison function with variable detune and spread.
•Two separate filter units with serial or parallel operation and 16 different algorithms each: low-, high- and band-pass, notch, comb, formant I/II, all-pass, power low- and band-pass, waveshaper, resonator, resampler, low-pass + resampler, frequency shifter, analog low-pass.

•Two ADSR envelope generators.
•Two LFO generators with sine, triangle, saw, square, sample & hold and random
waveforms; variable phase, fade-in time and different trigger modes. •Master effects including chorus, phaser, rotor, EQ, delay and reverb.
•Arpeggiator with deep sequencing capabilities.
•Chord memory function.
•A-B parameter morph feature: essentially two synth patches in one.
•Factory sound bank with over 400 preset patches; full patch compatibility with the iPad version.
KarmaFX Synth Modular v1.18 Build 6063 32 & 64 bit OSX KarmaFX Synth Modular v1.18 Build 6063 32 & 64 bit OSX
KarmaFX Synth Modular is an advanced and highly flexible Simulated Analog Modular Synthesizer and Effect Unit.

Its amazing visual- and highly intuitive user interface lets you modulate just about any knob or slider by any control signal - making the soundscape possibilities almost endless.

FEATURES:

- KarmaFX Synth Modular: Advanced Simulated Analog Modular Synthesizer and Effect Unit.
- Full Modular patching of synth Components and Controls.
- Internal high-frequency digital simulation of analog voltage levels.
- Oscillator with phase, Detune and Pulsewidth that generates standard synth waveforms.
- Dual Oscillator with Detune, Hardsync and Ring modulation.
- Sampler, 16/24/32 bit Mono/Stereo multi sample player that imports WAV/SF2/SFZ files.
- Multisample editing with Key/Velocity-ranges and Loop-Points.
- Additive and Pad module with waveform and Harmonic Magnitude/Phase editors.
- User defined waveforms and built-in presets of up to 1024 harmonics.
- 2/4 Pole Multimode Filters with Cutoff, Resonance (LP, HP, BP and BS filtertypes),
- SVF, Zolzer, Moog, 303like, Formant, Comb, Allpass, Parametric and Shelving Filters.
- 10-band digital and 31-band simulated analog Graphic Equalizers.
- Amplifier and Stereo module with Panning, Volume and Velocity control.
- Two channel Mixer with Ring modulation and Bit operations.
- Delay, Reverb, Phaser, Chorus/Flange, Pitchshift, BitShuffler and Distortion effects.
- Soft-knee Compressor with Peak/RMS detection and optional Sidechain.
- 10 Octave/12 Note Pitch control with Detune, Portamento and Pitchbend support.
- Controllers for Frequency Modulation (FM) and fast frequency sweeps.
- Up to 16 channel Unison controller with Detune and Stereo pan spread.
- 32 step, 4 octave Pattern controller with Hold, Loop, Legato and Arpeggiator.
- Bipolar/Unipolar LFO with Tempo Sync, HFO with FM option.
- ADSR and Multipoint Envelopes with Linear, Exponential, Hermite and Cubic curves.
- Step Sequencer, Envelope follower, Sample & Hold and Decay modules.
- Output module with Panning, DC removal, Volume and Clip control.
- Noise generator, filtered Pink, White and Brown Noise with Frequency Sync control.
- Input generator so synth can function as an Insert effect.
- Full stereo support (selected modules can run in mono to save CPU cycles).
- Patches are built up of Generators, Filters, Amplifiers, Controllers, Effects and Modulators.
- Up to 49 simultaneously running modules (8 modules per group and 1 output module).
- Instant visual feedback on all controls. Frequency, Time/Amplitude, Modulation, etc.
- Optionally see knobs and sliders animate as they are modulated.
- Choose between Mono, Legato, or up to 16-voice true Polyphony.
- MIDI modulator modules for MIDI Controller, Velocity, Aftertouch and Pitchbend input.
- 128 user-assignable Automation controls with MIDI Learn.
- Fully skinnable GUI: Optional skins are bundled with the installation.
- 7 banks of pre-made KarmaFX patches + userbanks. (More than 1300+ patches total).
Cakewalk Z3TA+ 2 v2.2.0.95 WiN X86 X64 Patched Cakewalk Z3TA+ 2 v2.2.0.95 WiN X86 X64 Patched
Z3TA+ 2 - The Ultimate Waveshaping Synth
Z3TA+2 is designed to suit any and all of your electronic productions. From pop to trap, energetic to atmospheric, you’ll have the sounds you need at your fingertips.

Waveshaping Synthesis

* Choose, tweak, and fine-tune your waveform
* Free and adaptive pitch-bending analog style performance grid
* 14 continuously variable dual-stage filter types
* Envelopes to control any parameter
* 6 Powerful LFOs for individual or universal control
* Straightforward Mod Matrix and Arpeggio tools
* Global control for a crushing brickwall limiter, level, tuning, and polyphony

Built-in Effects

* 5 distortion types, plus routing options and continuously variable controls
* Slow, Medium, and Fast compression with threshold, ratio, and makeup gain controls
* Totally tweakable Room, Hall, and Plate reverbs
* 7-band graphic eq with variable band settings and colorful Simulator Mode
* 9 adjustable Chorus, Phaser, and Flanger effects
* 4 Stereo Delay types with Sync and EQ controls
* Drag-and-drop effects in any order
KarmaFX Synth Modular 64BiT v1.17 MacOSX KarmaFX Synth Modular 64BiT v1.17 MacOSX
Soft / VST Instruments 20-12-2015
KarmaFX Synth Modular is an advanced and highly flexible Simulated Analog Modular Synthesizer and Effect Unit.

Its amazing visual- and highly intuitive user interface lets you modulate just about any knob or slider by any control signal - making the soundscape possibilities almost endless.

FEATURES:

- KarmaFX Synth Modular: Advanced Simulated Analog Modular Synthesizer and Effect Unit.
- Full Modular patching of synth Components and Controls.
- Internal high-frequency digital simulation of analog voltage levels.
- Oscillator with phase, Detune and Pulsewidth that generates standard synth waveforms.
- Dual Oscillator with Detune, Hardsync and Ring modulation.
- Sampler, 16/24/32 bit Mono/Stereo multi sample player that imports WAV/SF2/SFZ files.
- Multisample editing with Key/Velocity-ranges and Loop-Points.
- Additive and Pad module with waveform and Harmonic Magnitude/Phase editors.
- User defined waveforms and built-in presets of up to 1024 harmonics.
- 2/4 Pole Multimode Filters with Cutoff, Resonance (LP, HP, BP and BS filtertypes),
- SVF, Zolzer, Moog, 303like, Formant, Comb, Allpass, Parametric and Shelving Filters.
- 10-band digital and 31-band simulated analog Graphic Equalizers.
- Amplifier and Stereo module with Panning, Volume and Velocity control.
- Two channel Mixer with Ring modulation and Bit operations.
- Delay, Reverb, Phaser, Chorus/Flange, Pitchshift, BitShuffler and Distortion effects.
- Soft-knee Compressor with Peak/RMS detection and optional Sidechain.
- 10 Octave/12 Note Pitch control with Detune, Portamento and Pitchbend support.
- Controllers for Frequency Modulation (FM) and fast frequency sweeps.
- Up to 16 channel Unison controller with Detune and Stereo pan spread.
- 32 step, 4 octave Pattern controller with Hold, Loop, Legato and Arpeggiator.
- Bipolar/Unipolar LFO with Tempo Sync, HFO with FM option.
- ADSR and Multipoint Envelopes with Linear, Exponential, Hermite and Cubic curves.
- Step Sequencer, Envelope follower, Sample & Hold and Decay modules.
- Output module with Panning, DC removal, Volume and Clip control.
- Noise generator, filtered Pink, White and Brown Noise with Frequency Sync control.
- Input generator so synth can function as an Insert effect.
- Full stereo support (selected modules can run in mono to save CPU cycles).
- Patches are built up of Generators, Filters, Amplifiers, Controllers, Effects and Modulators.
- Up to 49 simultaneously running modules (8 modules per group and 1 output module).
- Instant visual feedback on all controls. Frequency, Time/Amplitude, Modulation, etc.
- Optionally see knobs and sliders animate as they are modulated.
- Choose between Mono, Legato, or up to 16-voice true Polyphony.
- MIDI modulator modules for MIDI Controller, Velocity, Aftertouch and Pitchbend input.
- 128 user-assignable Automation controls with MIDI Learn.
- Fully skinnable GUI: Optional skins are bundled with the installation.
- 7 banks of pre-made KarmaFX patches + userbanks. (More than 1300+ patches total).
AlgoMusic Czynthia VSTi v2.0-peace-out AlgoMusic Czynthia VSTi v2.0-peace-out
Soft / VST Instruments 28-09-2015
CZynthia is a Dual Phase Distortion virtual synthesizer.

Features:

* Two Phase Distortion Oscillator sections each offering two sets of 8 waveforms.
* Three 8 stage envelopes each synth for control of pitch, phase and amplitude.
* LFO (BPM synced or free running) offering 22 waveforms, rate and delay with pitch and phase destinations.
* Pulsar module for algorithmic style pitch/phase modulation. (BPM synced)
* Ring modulation, detune and transpose controls
* Volume and panorama controls for stereo imaging and master volume.
* Scale generator for force scaling of notes. Choice of 8 scales with root key selection.
* Powerful multi FX section offering 7 simultaneous stereo effects: EQ, Rotor, Metal, Wah, Delay, Chorus, Reverb.

Note: While this VSTi is inspired by the original Casio CZ series of synthesizers produced in the 1980s, it does not seek to emulate them.