Wave Arts Tube Saturator v2.02 WIN VST-AudioUTOPiA
VST Instruments / VST Plugins 22-12-2015
Wave Arts Tube Saturator v2.02 WIN VST-AudioUTOPiA
Tube Saturator 2 is a super accurate circuit simulation of a tube pre-amp with analog EQ, which can be overdriven gently for warming effects, or cranked for fat distortion. Like its predecessor, Tube Saturator, TS-2 is based on circuit simulation techology to capture every nuance of an analog circuit. The circuit consisting of the individual tubes, resistors, and capacitors is converted into a mathematical system of equations which is numerically solved to produce the exact same sound as a real circuit. But while the original consumed large amounts of CPU power, TS-2 is now super efficient. The Saturation section of TS-2 runs about 7x faster than the original and yet the modelling is even more accurate. TS-2 includes the original circuit simulation of the three band Baxandall type EQ as found in many guitar amplifiers.

In addition to this breakthrough improvement in speed, TS-2 has many new features. You can switch between 12AX7 and 12AU7 tubes for different harmonic characteristics. The EQ can be switched to run pre or post saturation. Saturation and EQ are separately switchable. Also there is a 2x oversampling mode using a very high quality resampler algorithm. Use 2x mode to attenuate aliased distortion harmonics. Also new is a mix control to blend the processed sound with the original. And finally, TS-2 has a gorgeous new interface.

For more information via video demos, see the video introduction to Tube Saturator 2, and also see examples of applying Tube Saturator 2 to different sounds.

home page:

http://wavearts.com/products/plugins/ts2
Related articles
Shattered Glass Audio SGA1566 MkII v1.0.3 Incl Keygen-R2R Shattered Glass Audio SGA1566 MkII v1.0.3 Incl Keygen-R2R
Soft / VST Instruments 20-12-2015
SGA1566 MkII adds major enhancements to the critically acclaimed SGA1566. SGA1566 MkII is loosely based on a single channel vintage tube preamplifier with added two-band active Baxandall EQ and stereo processing. To achieve the most authentic analog sound, the whole preamp circuit is simulated in real time using the high performance circuit simulator. The two-band Baxandall EQ can be positioned either before or after the preamp, or be completely taken out of the signal chain. Up to 8x oversampling can be used to eliminate aliasing. SGA1566 MkII offers two different filter types for use in oversampling.

Use SGA1566 MkII to add warmth to a track, as a saturation compressor, or to add "dirt" with tube overdrive.

Side Notes:
R2R has decided to release some of their earlier INTERNAL releases to the public today
Enjoy
Shattered Glass Audio SGA1566 MkII v1.0.3 MacOSX Incl. Keygen READ.NFO-HEXWARS Shattered Glass Audio SGA1566 MkII v1.0.3 MacOSX Incl. Keygen READ.NFO-HEXWARS
Soft / VST Instruments 19-12-2015
SGA1566 MkII adds major enhancements to the critically acclaimed SGA1566. SGA1566 MkII is loosely based on a single channel vintage tube preamplifier with added two-band active Baxandall EQ and stereo processing. To achieve the most authentic analog sound, the whole preamp circuit is simulated in real time using the high performance circuit simulator. The two-band Baxandall EQ can be positioned either before or after the preamp, or be completely taken out of the signal chain. Up to 8x oversampling can be used to eliminate aliasing. SGA1566 MkII offers two different filter types for use in oversampling.

Use SGA1566 MkII to add warmth to a track, as a saturation compressor, or to add "dirt" with tube overdrive.
Audified STA All Effects v1.5.2 WiN/OSX Incl.Keygen-R2R Audified STA All Effects v1.5.2 WiN/OSX Incl.Keygen-R2R
Soft / VST Instruments 15-12-2015
Set of summing tube processors that are also affordable.

We believe it is not only hi-end professional studios with million dollar equipment, that have right to sound great. So we have gathered all the years of our experience in creating professional audio applications and precise circuit simulation to bring you this set of five of tube effects plug-ins.

Summing Tube Amplifier (STA) mixes the wet and dry signals and it adds a nonlinear distortion resulting in more vintage sound. Primarily, this effect is designed to be used as an insert effect to fully exploit the summing circuit. The plugin has also a "Wet only” option when only the signal processed by the tube circuit is sent to the output. It allows to use the plugin also in a send bus.
Included effects

Believe it or not, the single knob of STA Preamp can give your mixes some extra value. Choose one of three types of tubes and control amount of saturation. STA Chorus adds your instruments a little warmth and tickeling vibe! Extra punch, meat, juice... Call it what you want, but STA Flanger gives it to you. If your sound is not spacey enough, take it to the universe with STA Phaser! And last but not least - STA Enhancer will make your mixes beautiful and bright. 

Notes

As some of you may know R2R has open up the vault to some of their earlier INTERNAL releases
Mission continues
Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX
Soft / VST Instruments 14-11-2015
Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for "it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.
Cytomic The Drop v1.0.6 WiN x86 x64 V.R-Based Patch Cytomic The Drop v1.0.6 WiN x86 x64 V.R-Based Patch
Soft / VST Instruments 20-10-2015
The Drop is an analog modeled resonant filter plug-in. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. There is a huge level of detail in the models, which gives them amazing drive and tone. As well as the detailed circuit models more efficient algorithms are included for situations where CPU considerations are more important than tone, but even these models are of the highest quality.

Feature Summary

Dual stereo resonant filter with a Highpass into Lowpass
Seven different detailed circuit models
Stereo and Mono processing with either 2 or 4 poles
Loads of drive and character
Full frequency range and perfect resonance tracking without oversampling so there is no latency in processing
Huge amounts of resonance if you want and also "Safe" button for DJ use where screaming self oscillation is not desired
One basic and one advanced LFO capable of audio rate stereo modulation
Two analog modelled AHR envelopes that double as envelope followers, one for the cutoff and one for amplitude
FM from main audio input or sidechain audio input
DSP coded using C++ and SSE2, Interface coded using the Juce framework (C++)
Password protected copy protection

Circuit Modelling and DSP

Cytomic uses the same circuit modelling techniques that are used in professional circuit simulation packages but optimised for real time use. The structure including all feedback loops and useful non-linearities of the original circuit has been preserved. The algorithm uses actual values for resistors, capacitors, diodes, transistors and other circuit components. The voltages and currents are solved in real time and match as closely as possible to the analog circuit in both the time and frequency domains.
Audified STA Phaser v1.5.1 Incl.Keygen WiN/MAC-R2R Audified STA Phaser v1.5.1 Incl.Keygen WiN/MAC-R2R
Soft / VST Instruments 22-07-2015
This effect is comprised of an emulation of analog phaser effect and Summing Tube Amplifier (STA) which mixes the wet and dry signal as well as it adds a nonlinear distortion resulting in more vintage sound. Primarily, this effect is designed to be used as an insert effect to fully exploit the summing circuit. The plugin has also a "Wet only” option when only the effected signal is processed by the tube circuit, which allows to use the plugin also in a send bus.

Compatibility

DAW application supporting VST 2.4/VST 3/AAX/AU (Mac only) formats

PC: CPU with SSE2 support (Intel Pentium 4 or AMD Athlon 64 and newer), Windows Vista, Windows 7, 8 (32-bit/64-bit)

Mac: Intel Core, Mac OS X 10.7, 10.8, 10.9, 10.10 
CPU speed 1.5 GHz, 50 MB of HDD space, Screen resolution at least 1024x768 (recommended 1280x800 and more)