Shattered Glass Audio SGA1566 MkII v1.0.3 MacOSX Incl. Keygen READ.NFO-HEXWARS
Soft / VST Instruments 19-12-2015
Shattered Glass Audio SGA1566 MkII v1.0.3 MacOSX Incl. Keygen READ.NFO-HEXWARS
SGA1566 MkII adds major enhancements to the critically acclaimed SGA1566. SGA1566 MkII is loosely based on a single channel vintage tube preamplifier with added two-band active Baxandall EQ and stereo processing. To achieve the most authentic analog sound, the whole preamp circuit is simulated in real time using the high performance circuit simulator. The two-band Baxandall EQ can be positioned either before or after the preamp, or be completely taken out of the signal chain. Up to 8x oversampling can be used to eliminate aliasing. SGA1566 MkII offers two different filter types for use in oversampling.

Use SGA1566 MkII to add warmth to a track, as a saturation compressor, or to add "dirt" with tube overdrive.

home page:

http://www.shatteredglassaudio.com/product.php?id=105
Related articles
Audified STA All Effects v1.5.2 WiN/OSX Incl.Keygen-R2R Audified STA All Effects v1.5.2 WiN/OSX Incl.Keygen-R2R
Soft / VST Instruments 15-12-2015
Set of summing tube processors that are also affordable.

We believe it is not only hi-end professional studios with million dollar equipment, that have right to sound great. So we have gathered all the years of our experience in creating professional audio applications and precise circuit simulation to bring you this set of five of tube effects plug-ins.

Summing Tube Amplifier (STA) mixes the wet and dry signals and it adds a nonlinear distortion resulting in more vintage sound. Primarily, this effect is designed to be used as an insert effect to fully exploit the summing circuit. The plugin has also a "Wet only” option when only the signal processed by the tube circuit is sent to the output. It allows to use the plugin also in a send bus.
Included effects

Believe it or not, the single knob of STA Preamp can give your mixes some extra value. Choose one of three types of tubes and control amount of saturation. STA Chorus adds your instruments a little warmth and tickeling vibe! Extra punch, meat, juice... Call it what you want, but STA Flanger gives it to you. If your sound is not spacey enough, take it to the universe with STA Phaser! And last but not least - STA Enhancer will make your mixes beautiful and bright. 

Notes

As some of you may know R2R has open up the vault to some of their earlier INTERNAL releases
Mission continues
Lindell ChannelX (All) OSX Plugins-0RGan1c Lindell ChannelX (All) OSX Plugins-0RGan1c
Soft / VST Instruments 19-11-2015
The Channel X bundle contains the 3 plugins :

6X-500 preamp / filters plugin
7X-500 FET compressor plugin
PEX-500 passive EQ plugin

Key features
Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode

Compatibility
Mac

AudioUnits : 32 bits, 64 bits
VST : 32 bits, 64 bits
VST3 : 32 bits, 64 bits
AAX : 32 bits, 64 bits
RTAS
Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX
Soft / VST Instruments 14-11-2015
Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for "it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.
Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched
Soft / VST Instruments 10-10-2015
The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ. 

Key features:

Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode
G-Sonique GSXL4070 Parametric Equalizer (x86/x64) Hy2ro G-Sonique GSXL4070 Parametric Equalizer (x86/x64) Hy2ro
Soft / VST Instruments 21-09-2015
GSXL4070 is G-Sonique´s new parametric equalizer inspired / based on the famous British mix console equalizers. GSXL4070 offers a modern solid
state analog electronic sound without any unwanted or over saturated coloring of the signal (like with vacuum tube or vintage EQ's), but it still has a very
intense, rich and significant sound.

GSXL4070 is a fully parametric stereo equalizer with 4 bands (LF, LMF, HMF, HF) and HP (BASS CUT), Q control, and +-12db attenuation/boosting of each
band. Ideal for mixing and mastering purposes.

For the best possible clarity of sound and minimum artifacts, 2x internal oversampling algorithms were used.
- British mix-console EQ "solid state electronics" style of sound without unwanted coloration or an overly saturated sound. With 2x internal oversampling
for double precise DSP algorithms, calculations for the minimum of unwanted artifacts.

- 4 fully parametric EQ bands:

LF - Low frequency, (20-500Hz)
LMF - Low mid frequency, (200 Hz - 3 kHz)
HMF - high mid frequency, (700 Hz - 12 kHz)
HF - high frequency ( 1.5 kHz - 20 kHz)

HP (High pass - Bass cut) filter 15 - 400 Hz bass cut with on/off switch

with Q-control (bandwidth), attenuation/boost ( + / - 12db per band),

- Output Volume knob

- Bypass switch

- Preset manager
Audified STA Phaser v1.5.1 Incl.Keygen WiN/MAC-R2R Audified STA Phaser v1.5.1 Incl.Keygen WiN/MAC-R2R
Soft / VST Instruments 22-07-2015
This effect is comprised of an emulation of analog phaser effect and Summing Tube Amplifier (STA) which mixes the wet and dry signal as well as it adds a nonlinear distortion resulting in more vintage sound. Primarily, this effect is designed to be used as an insert effect to fully exploit the summing circuit. The plugin has also a "Wet only” option when only the effected signal is processed by the tube circuit, which allows to use the plugin also in a send bus.

Compatibility

DAW application supporting VST 2.4/VST 3/AAX/AU (Mac only) formats

PC: CPU with SSE2 support (Intel Pentium 4 or AMD Athlon 64 and newer), Windows Vista, Windows 7, 8 (32-bit/64-bit)

Mac: Intel Core, Mac OS X 10.7, 10.8, 10.9, 10.10 
CPU speed 1.5 GHz, 50 MB of HDD space, Screen resolution at least 1024x768 (recommended 1280x800 and more)