D16 Group Devastor 2.v2.0 WiN/MAC-UNION
Soft / VST Instruments 12-12-2015
D16 Group Devastor 2.v2.0 WiN/MAC-UNION
Devastor 2 is the second generation of D16’s first FX Plugin from the SilverLine Collection series. Devastor is a deceptively simple yet remarkable Multiband Distortion Unit. It is an enhanced version of the distortion unit you can find in Phoscyon, but with full control over multiband processing. This elevates its sonic mangling capabilities to an entirely new level!

The plug-in consists of four essential blocks:
• Dynamics-flattener module (one-knob controlled input signal compressor)
• Diode-clipper distortion
• Three multi-mode filter sections
• Optionally activated signal limiter

The plug-in offers nine different connection topologies between its filters and diode-clipper. Filters can process the signal before or after it gets fed into the diode-clipper, but some of the configurations even allow the filters to work alongside the clipper, which greatly increases the possible sonic palette.

Devastor’s filters are not simply the peaking EQ type which are commonly used in classic multiband distortion units: rather, they are like those found in analog synthesizers (low pass, high pass, band pass and band reject) with adjustable resonance and cutoff parameters. As a result, Devastor has a completely unique sound. Just check out the factory content and hear for yourself!

Versatile and advanced
Devastor can be used to distort and enhance a wide range of sounds, from full-on acid synth sounds to guitar fuzz or an analog amp with speaker combo. It can even be used with drums to make them sound dirtier and more dynamic! Devastor isn't just good at creating distorted, monster sounds: it can also be used subtly to improve the timbre and character of gentler sounds. For example, reducing the preamp gain, increasing the threshold, and selecting a soft-knee for the dynamics will bring out more warmth and detail in a sound without introducing distortion.

When designing Devastor, we applied special antialiasing techniques to the output signal to make sure it was devoid of aliasing (one of the reasons why digital distortion units can sound so cold and un-musical). As a result, Devastor has a warm, musical, and very high quality sound.
We would like to invite you to listen the audio examples to whet your appetite and to check out the demo version for yourself if you need any more convincing. Devastor uses algorithms of such high quality that you'd be forgiven in a blind test for wondering if the sound has somehow been sent from the computer to an external analog distortion unit and back into the computer again!

D16 Group Devastor 2.0 Highlights:
- Signal Routing Selector, which replaces version’s one Pre / Post filter switches, giving more efficient control over processing path and at the same time offering some new, unachievable before, signal topologies
- Built-in Limiter prevents the output’s clipping as well as make the sound more vivid and juicy
- Redesigned Filter model provides more analog feeling to the plug-in
- Improved Dynamics Flattener delivers punchier and definitely more in-your-face character of the module
- New tag-based preset management system, alternative UI sizes and refined plug-in configuration, which comprises on new plug-in framework

Alternative Changelog:
- Refined filter models.
- Improved peak detection and more natural envelopes in Dynamics flattener.
- Optional output limiter.
- Tag-based preset browser.
- Two alternative GUI sizes.
- MIDI-learn functionality throughout.
- 9 different topologies of connections for filters and the diode-clipper.

home page:

http://d16.pl/devastor
Related articles
D16 Group Devastor v2.0.0 MacOSX Incl. Keygen HEXWARS D16 Group Devastor v2.0.0 MacOSX Incl. Keygen HEXWARS
Soft / VST Instruments 12-12-2015
Devastor 2 is the second generation of D16’s first FX Plugin from the SilverLine Collection series. Devastor is a deceptively simple yet remarkable Multiband Distortion Unit. It is an enhanced version of the distortion unit you can find in Phoscyon, but with full control over multiband processing. This elevates its sonic mangling capabilities to an entirely new level!

The plug-in consists of four essential blocks:
• Dynamics-flattener module (one-knob controlled input signal compressor)
• Diode-clipper distortion
• Three multi-mode filter sections
• Optionally activated signal limiter

The plug-in offers nine different connection topologies between its filters and diode-clipper. Filters can process the signal before or after it gets fed into the diode-clipper, but some of the configurations even allow the filters to work alongside the clipper, which greatly increases the possible sonic palette.

Devastor’s filters are not simply the peaking EQ type which are commonly used in classic multiband distortion units: rather, they are like those found in analog synthesizers (low pass, high pass, band pass and band reject) with adjustable resonance and cutoff parameters. As a result, Devastor has a completely unique sound. Just check out the factory content and hear for yourself!

Versatile and advanced
Devastor can be used to distort and enhance a wide range of sounds, from full-on acid synth sounds to guitar fuzz or an analog amp with speaker combo. It can even be used with drums to make them sound dirtier and more dynamic! Devastor isn't just good at creating distorted, monster sounds: it can also be used subtly to improve the timbre and character of gentler sounds. For example, reducing the preamp gain, increasing the threshold, and selecting a soft-knee for the dynamics will bring out more warmth and detail in a sound without introducing distortion.

When designing Devastor, we applied special antialiasing techniques to the output signal to make sure it was devoid of aliasing (one of the reasons why digital distortion units can sound so cold and un-musical). As a result, Devastor has a warm, musical, and very high quality sound.
We would like to invite you to listen the audio examples to whet your appetite and to check out the demo version for yourself if you need any more convincing. Devastor uses algorithms of such high quality that you'd be forgiven in a blind test for wondering if the sound has somehow been sent from the computer to an external analog distortion unit and back into the computer again!

D16 Group Devastor 2.0 Highlights:
- Signal Routing Selector, which replaces version’s one Pre / Post filter switches, giving more efficient control over processing path and at the same time offering some new, unachievable before, signal topologies
- Built-in Limiter prevents the output’s clipping as well as make the sound more vivid and juicy
- Redesigned Filter model provides more analog feeling to the plug-in
- Improved Dynamics Flattener delivers punchier and definitely more in-your-face character of the module
- New tag-based preset management system, alternative UI sizes and refined plug-in configuration, which comprises on new plug-in framework

Alternative Changelog:
- Refined filter models.
- Improved peak detection and more natural envelopes in Dynamics flattener.
- Optional output limiter.
- Tag-based preset browser.
- Two alternative GUI sizes.
- MIDI-learn functionality throughout.
- 9 different topologies of connections for filters and the diode-clipper.


Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX
Soft / VST Instruments 14-11-2015
Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for "it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.
D16 Group Devastor 2 v2.00 [k] D16 Group Devastor 2 v2.00 [k]
Soft / VST Instruments 28-10-2015
Devastor 2 is the second generation of D16’s first FX Plugin from the SilverLine Collection series. Devastor is a deceptively simple yet remarkable Multiband Distortion Unit. It is an enhanced version of the distortion unit you can find in Phoscyon, but with full control over multiband processing. This elevates its sonic mangling capabilities to an entirely new level!

Structure

The plug-in consists of four essential blocks:
• Dynamics-flattener module (one-knob controlled input signal compressor)
• Diode-clipper distortion
• Three multi-mode filter sections
• Optionally activated signal limiter

The plug-in offers nine different connection topologies between its filters and diode-clipper. Filters can process the signal before or after it gets fed into the diode-clipper, but some of the configurations even allow the filters to work alongside the clipper, which greatly increases the possible sonic palette.

Devastor’s filters are not simply the peaking EQ type which are commonly used in classic multiband distortion units: rather, they are like those found in analog synthesizers (low pass, high pass, band pass and band reject) with adjustable resonance and cutoff parameters. As a result, Devastor has a completely unique sound. Just check out the factory content and hear for yourself!

Versatile and advanced
Devastor can be used to distort and enhance a wide range of sounds, from full-on acid synth sounds to guitar fuzz or an analog amp with speaker combo. It can even be used with drums to make them sound dirtier and more dynamic! Devastor isn't just good at creating distorted, monster sounds: it can also be used subtly to improve the timbre and character of gentler sounds. For example, reducing the preamp gain, increasing the threshold, and selecting a soft-knee for the dynamics will bring out more warmth and detail in a sound without introducing distortion.

When designing Devastor, we applied special antialiasing techniques to the output signal to make sure it was devoid of aliasing (one of the reasons why digital distortion units can sound so cold and un-musical). As a result, Devastor has a warm, musical, and very high quality sound.

We would like to invite you to listen the audio examples to whet your appetite and to check out the demo version for yourself if you need any more convincing. Devastor uses algorithms of such high quality that you'd be forgiven in a blind test for wondering if the sound has somehow been sent from the computer to an external analog distortion unit and back into the computer again!
Rebel Audio OverToner v1.0 x32 x64 WIN Rebel Audio OverToner v1.0 x32 x64 WIN
Soft / VST Instruments 18-10-2015
The OverToner is a distortion VST plugin designed to expand the spectrum of your sound. You have the choice between 13 overtoning functions. The expanded output signal could be processed with a two band analog approximated band pass filter. It is possible to activate/deactivate and parameterize each filter band independently.

OverToner features

Two independent analog approximated output filters.
13 overtoning functions.
Smoothed controller fading.
Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched
Soft / VST Instruments 10-10-2015
The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ. 

Key features:

Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode
Blue Cat's Dynamics v4.0 MAC OSX-Kleen Blue Cat's Dynamics v4.0 MAC OSX-Kleen
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.
The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.
An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.
The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.
All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.
System Requirements Mac OS X:

An Intel processor.
Mac OS X Yosemite (10.10), Mavericks (10.9), Mountain Lion (10.8), Lion (10.7), 
Snow Leopard (10.6), or Leopard (10.5).
Any VST / Audio Unit (32/64-bit) / RTAS / AAX compatible application.