Cytomic The Glue v1.3.12 Incl Patched and Keygen-R2R
Soft / VST Instruments 11-12-2015
Cytomic The Glue v1.3.12 Incl Patched and Keygen-R2R

The Glue is a high quality analog modeled plug-in based on a cross between an E and G series SSL 4000 buss compressor with some additional features. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. It's quick and easy to use and has an uncluttered interface.

Additions include an ultra-fast attack time of up to 0.01mS and a Range knob which backs off the compression to give incredibly natural sounding attacks and limits the maximum amount of compression applied. Also included are external sidechain support and an adjustable side-chain highpass filter.

Summary:
Accurate analog model of an SSL 4000 buss compressor.
Ultra-fast attack time of up to 0.01 mS.
Range knob to naturally control the maximum compression applied.
Peak Clip to optionally hard shape transients.

Side Notes:
R2R has decided to release some of their earlier INTERNAL releases to the public today
Enjoy

home page:


http://www.cytomic.com/glue
Related articles
Cytomic The Drop v1.0.16 Incl Patched and Keygen-R2R Cytomic The Drop v1.0.16 Incl Patched and Keygen-R2R
Soft / VST Instruments 11-12-2015
The Drop is an analog modeled resonant filter plug-in. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. There is a huge level of detail in the models, which gives them amazing drive and tone. As well as the detailed circuit models more efficient algorithms are included for situations where CPU considerations are more important than tone, but even these models are of the highest quality.

Features:
Dual filter section with a Highpass followed by a Lowpass filter.
7 Highpass and 7 Lowpass circuit modelled filters from classic synths.
Loads of drive and character.
Full frequency range and perfect resonance tracking without oversampling so there is no delay for live use.
Huge amounts of resonance, also a resonance limit button for DJ use.
Two LFOs, one basic, one powerful with step sequencer for levels.
Two Envelopes / Followers, diode modelled, from input or sidechain.
FM from input or sidechain.
Stereo and Mono processing.

Side Notes:
R2R has decided to release some of their earlier INTERNAL releases to the public today
Enjoy
Cytomic TheDrop v1.0.16 MacOSX Incl. Patched and Keygen - HEXWARS Cytomic TheDrop v1.0.16 MacOSX Incl. Patched and Keygen - HEXWARS
Soft / VST Instruments 10-12-2015
The Drop is an analog modeled resonant filter plug-in. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. There is a huge level of detail in the models, which gives them amazing drive and tone. As well as the detailed circuit models more efficient algorithms are included for situations where CPU considerations are more important than tone, but even these models are of the highest quality.

Enjoy some release from hexwars internals vault!

TEAM HEXWARS NOTES:
XMas come earlier this year!

To our dear MacOSX friends:
U better get yourself a good Windows machine...
Cytomic TheGlue v1.3.12 MacOSX Incl.Patched and Keygen-HEXWARS Cytomic TheGlue v1.3.12 MacOSX Incl.Patched and Keygen-HEXWARS
Soft / VST Instruments 10-12-2015
The Glue is an analog modeled compressor plug-in based on The classic 80's British big console buss compressor with some additional features. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. It's quick and easy to use and has an uncluttered interface.

Additions over the original circuit include an ultra-fast attack time down to 0.01mS and a Range knob, which backs off the compression to give incredibly natural sounding attacks and also limit the maximum amount of compression applied. There is also external sidechain support and an adjustable sidechain highpass filter.

Accurate analog model of classic 80's British big console buss compressor
Ultra-fast attack time of up to 0.01 mS
Range knob to naturally control the maximum compression applied
Peak Clip to optionally hard limit transients
DSP coded using C++ and SSE2, Interface coded using the Juce framework (C++)
Password protected copy protection
Cytomic The Drop v1.0.6 WiN x86 x64 V.R-Based Patch Cytomic The Drop v1.0.6 WiN x86 x64 V.R-Based Patch
Soft / VST Instruments 20-10-2015
The Drop is an analog modeled resonant filter plug-in. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. There is a huge level of detail in the models, which gives them amazing drive and tone. As well as the detailed circuit models more efficient algorithms are included for situations where CPU considerations are more important than tone, but even these models are of the highest quality.

Feature Summary

Dual stereo resonant filter with a Highpass into Lowpass
Seven different detailed circuit models
Stereo and Mono processing with either 2 or 4 poles
Loads of drive and character
Full frequency range and perfect resonance tracking without oversampling so there is no latency in processing
Huge amounts of resonance if you want and also "Safe" button for DJ use where screaming self oscillation is not desired
One basic and one advanced LFO capable of audio rate stereo modulation
Two analog modelled AHR envelopes that double as envelope followers, one for the cutoff and one for amplitude
FM from main audio input or sidechain audio input
DSP coded using C++ and SSE2, Interface coded using the Juce framework (C++)
Password protected copy protection

Circuit Modelling and DSP

Cytomic uses the same circuit modelling techniques that are used in professional circuit simulation packages but optimised for real time use. The structure including all feedback loops and useful non-linearities of the original circuit has been preserved. The algorithm uses actual values for resistors, capacitors, diodes, transistors and other circuit components. The voltages and currents are solved in real time and match as closely as possible to the analog circuit in both the time and frequency domains.
Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched
Soft / VST Instruments 10-10-2015
The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ. 

Key features:

Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode
Fabfilter Pro-C 2 x86 x64 Fabfilter Pro-C 2 x86 x64
Soft / VST Instruments 29-09-2015
Incredible sound and character
FabFilter Pro-C 2 is a high-quality compressor plug-in for the most demanding engineers. Whether you need subtle mastering compression, an upfront lead vocal, that magic drum glue or deep EDM pumping: Pro-C 2 gets the job done with style!
Watch demoFabFilter Pro-C 2
Everything you need
Pro-C 2 offers eight different, program-dependent compression styles with beautiful sound and character. But there's more! Apart from the classic compressor controls, you also get smooth lookahead, up to 4x oversampling, intelligent auto-gain and auto-release, a variable knee, hold, range, external side-chain triggering, variable stereo linking and mid/side processing, all packed in a beautiful Retina user interface.
FabFilter Pro-C 2 Controls
Beautiful interface and optimized workflow
The fully redesigned interface in FabFilter Pro-C 2 offers insightful metering with real-time displays that will greatly improve workflow. The large animated level/knee display visualizes exactly when, why and how compression is applied to incoming audio. Accurate level meters show the exact peak and loudness values, while the circular side-chain input meter turns finding the perfect threshold setting into a trivial task. And the large side-chain EQ controller makes it easier than ever to filter the trigger signal any way you like.
 
Pro-C 2 Full Screen
FabFilter goodies
Of course, you also get all the usual FabFilter goodies: perfectly tuned knobs, interactive MIDI Learn, undo/redo and A/B switch, Smart Parameter Interpolation for smooth parameter transitions, an extensive help file with interactive help hints, sample-accurate automation, advanced optimization and much more!
FabFilter Pro-C 2 Help HintsKey features
Eight different compression styles, of which five are new in version 2: Vocal, Mastering, Bus, Punch and PumpingNEW
Gorgeous Retina interface, with (optional) animated level knee displays and accurate peak/loudness meteringNEW
Side-chain EQ section, with customizable HP and LP filters, plus an additional freely adjustable filterNEW
Program-dependent attack and release curves
Smooth lookahead (up to 20 ms), which can be enabled/disabled to ensure zero latency processingNEW
Intelligent Auto Gain
Hold (up to 500 ms)NEW
Custom knee, variable from hard knee to a 72 dB soft knee (to enable saturation-like effects)NEW
Auto Release
Super-fast attack times
Up to 4x oversamplingNEW
Variable stereo linking and mid/side processing, with mid-only, side-only, M > S and S > M processing.
Audition Triggering option, which enables users to hear on which parts of the audio Pro-C 2 is triggering and how much compression is taking placeNEW
Multiple interface sizes: Small, Medium and LargeNEW
Range setting, which limits the maximum applied gain changeNEW
Mix setting, which scales the gain change from 0% to 200%NEW
Full Screen mode, offering a large level display and side-chain EQ controllerNEW
Accurate, large level and gain change meters, with peak and loudness level visualization. The loudness level complies with the Momentary mode of the EBU R128 / ITU-R 1770 standardsNEW
Retina support on OS X and High DPI support on WindowsNEW
External side chain triggering
GPU-powered graphics acceleration
Stereo and mono plug-ins available
Optional MIDI triggeringNEW
Supports common Pro Tools hardware control surfaces
MIDI Learn
Undo/redo and A/B comparison
Smart Parameter Interpolation
Sample-accurate automation of all parameters
Extensive help file with interactive help hints
Available in VST, VST3, Audio Units, AAX Native and AudioSuite formats (all both 64-bit and 32-bit), as well as RTAS (32-bit only)