Blue Cat Audio Stereo Parametr'EQ v3.52 Ked MAC OSX-Kleen
Soft / VST Instruments 11-12-2015
Blue Cat Audio Stereo Parametr'EQ v3.52 Ked MAC OSX-Kleen
Blue Cat's Stereo Parametr'EQ is a 7 bands parametric stereo equalizer based on Blue Cat's Parametr'EQ technology, providing the best of the analog and digital worlds in stereo.

This stereo plug-in enables you to manage separately the left and right equalizer settings and keep an eye on both frequency responses thanks to the frequency graph above the controls. The left equalizer is visible by its blue color and the right equalizer controls and graph are red. Left and right controls can be linked together with several modes. The Smooth Update and Smooth Bypass technologies have been included in this plug-in so that you can automate the equalizer in your favorite sequencer or use the MIDI capabilities of your host software to control the EQ in real time. You will get an absolutely zipper-free continuous time-varying equalization. These capabilities and the zero latency of this plug-in make it suitable for any real time application. 

home page:

http://www.bluecataudio.com/Products/Product_StereoParametrEQ
Related articles
Blue Cat Audio Liny EQ v5.02 Ked MAC OSX-Kleen Blue Cat Audio Liny EQ v5.02 Ked MAC OSX-Kleen
Soft / VST Instruments 11-12-2015
Blue Cat's Liny EQ is an 8 bands linear phase equalizer with very low latency and comprehensive visual feedback: thanks to its highly optimized linear phase kernel, it processes the signal without phase distortion, with an unusually short latency (less than 3 milliseconds).

Its wide range of gain (+-40dB) and multiple filter shapes make it very flexible for a graphic EQ, letting you create unique EQ curves. The dual channels version offers independent settings for the left/right or mid/side channels, with flexible linking capabilities for an optimal workflow.

The highly customizable user interface includes a first class spectrum analyzer and spectrogram viewer. It lets you choose the best layout and display options to adapt the plug-in to your own workflow.

Main Features:
Linear phase graphic equalizer
very short latency (less than 3 ms: 128 samples at 44,1 kHz), with minimal pre-ringing artefacts.
customizable range (+/- 40 dB).
Exact EQ curve display.
Four EQ shapes.
Automatic gain compensation.
Real time spectrum analyzer display.
High resolution color and greyscale spectrogram display.
High resolution color peak meter.
Single and dual channel versions.
Left/right or mid/side processing for spectral stereo widening or narrowing.
Advanced channels linking capabilities.
Multiple display sizes.
Highly customizable user interface: display what you need, the way you need.
Blue Cat Audio FreqAnalyst Pro v1.95 Ked MAC OSX-Kleen Blue Cat Audio FreqAnalyst Pro v1.95 Ked MAC OSX-Kleen
Soft / VST Instruments 9-12-2015
Blue Cat's FreqAnalyst Pro is a real time spectrum analyzer with advanced functionalities. It uses the same smooth algorithms as its little brother (Blue Cat's FreqAnalyst free plug-in): it has been designed to provide extreme smoothness and high resolution for both time and frequency. The frequency analysis can be fine tuned in details: manage its precision and rate, apply an offset or slope to the measured spectrum. Two thresholding systems are available, and the time response can be changed thanks to the attack and release parameters. Three modes are offered for each channel: instant, peak or average response can be displayed on the same graph. Zooming capabilities and coordinates display let you exactly measure the characteristics of the spectrum.


The four memory slots let you store any curve in memory: it helps you make comparisons between several tracks or effects setup very easily.

A spectrogram view has been added so that you can monitor the evolution of the spectrum over time either in 2D or 3D (3D waterfall mode). All channels are of course available in this view, with exact coordinates display and zooming capabilities. 
home page
Blue Cat Audio Blue Cat PatchWork Stand Alone Application v1.7.1 WiN OSX RETAiL Incl. R2R Blue Cat Audio Blue Cat PatchWork Stand Alone Application v1.7.1 WiN OSX RETAiL Incl. R2R
Soft / VST Instruments 13-10-2015
Blue Cat's PatchWork is a universal plug-ins patchbay that can host up to 64 VST plug-ins into any Digital Audio Workstation (DAW) in one instance.

It is possible to chain effects in series or create up to 8 parallel chains that can be activated independently. This lets you create your favorite effects or instruments configurations within the plug-in, without the need for multiple busses. These configurations can be saved as presets and recalled instantly, or shared with multiple DAWs, using any plug-in format.

Despite the name, you can forget about wires or cables: configuring plug-ins routing is as simple as adding or removing a row or a column in the rack's matrix. All plug-ins can also communicate with each other or with the host application using the virtual MIDI ports offered by the plug-in.

For each plug-in slot, latency compensation, presets management, undo/redo integration, and individual plug-in bypass are included for optimal operation. The plug-in also stores the position of the window for each plug-in so that the layout is restored with your session or saved with presets.

Also, sub plug-ins can be automated or controlled with external control surfaces using Blue Cat's PatchWork parameters mapping capabilities.

The plug-in is available as an audio effect or a virtual instrument so that it can be inserted on any type of track, with up to 8 audio channels.

Input and output level meters are also included to monitor the signal that is dispatched to inserted plug-ins.

V1.71 (2015/07/16)

Last loaded preset can now be saved directly from the presets menu without having to select the file.
VST: fixed latency compensation reporting in Cubase (no need to re-enable the plug-in to update the latency anymore).
AAX & RTAS: fixed feedback loop that could occur in bypass mode when the plug-in was inserted before another one.

Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based
Soft / VST Instruments 11-10-2015
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.

The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.

An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.

The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.

All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.

The package includes a mono and a stereo version for optimal CPU usage.

Main Features:

- Full featured dynamics processor: compressor, gate, limiter, expander, waveshaper with a unique two thresholds system.
- Total control over the processor: continuous peak/RMS and Opto/VCA modes selection, peak envelope shape control, depth control to limit the gain range.
- Total control over the signal: dry/wet control for parallel compression, input and side chain filters.
- Stereo or mid-side processing with multiple channels linking options.
- Post brickwall limiter or clipper.
- Optimal monitoring: dynamics response, envelopes and gain reduction real time display with zooming capability. The main compression information can be recorded as automation curves.
- Best quality: up to 4x oversampling for the best sounding quality.
- Multiple side chaining modes: a unique way to perform side chain compression, ducking, gating and much more.
- Fully configurable user interface for optimal experience.

Blue Cat Audio Standards:

- Native DSP code for optimal performance.
- Full MIDI control and automation support with silent, zipper-free parameters update, advanced response control and MIDI Learn.
- No CPU load on idle: when the plug-in is fed with silence, the processing smoothly shuts down, to optimize the CPU usage of your Digital Audio Workstation.
- Skinnable and customizable user interface with transparency management.
- Automation and MIDI output: record output parameters as automation curves or send MIDI CC messages to other plug-ins for powerful side chain effects.
- Smooth Bypass: activate/deactivate the plug-in with absolutely no noise.
- Undo/Redo.
- Full featured integrated presets manager.
- Copy/paste the plug-in's state between instances using the system clipboard.
- Any sample rate supported.
G-Sonique GSXL4070 Parametric Equalizer (x86/x64) Hy2ro G-Sonique GSXL4070 Parametric Equalizer (x86/x64) Hy2ro
Soft / VST Instruments 21-09-2015
GSXL4070 is G-Sonique´s new parametric equalizer inspired / based on the famous British mix console equalizers. GSXL4070 offers a modern solid
state analog electronic sound without any unwanted or over saturated coloring of the signal (like with vacuum tube or vintage EQ's), but it still has a very
intense, rich and significant sound.

GSXL4070 is a fully parametric stereo equalizer with 4 bands (LF, LMF, HMF, HF) and HP (BASS CUT), Q control, and +-12db attenuation/boosting of each
band. Ideal for mixing and mastering purposes.

For the best possible clarity of sound and minimum artifacts, 2x internal oversampling algorithms were used.
- British mix-console EQ "solid state electronics" style of sound without unwanted coloration or an overly saturated sound. With 2x internal oversampling
for double precise DSP algorithms, calculations for the minimum of unwanted artifacts.

- 4 fully parametric EQ bands:

LF - Low frequency, (20-500Hz)
LMF - Low mid frequency, (200 Hz - 3 kHz)
HMF - high mid frequency, (700 Hz - 12 kHz)
HF - high frequency ( 1.5 kHz - 20 kHz)

HP (High pass - Bass cut) filter 15 - 400 Hz bass cut with on/off switch

with Q-control (bandwidth), attenuation/boost ( + / - 12db per band),

- Output Volume knob

- Bypass switch

- Preset manager
Blue Cat Audio MB-7 Mixer v2.51 AU OSX-Kleen Blue Cat Audio MB-7 Mixer v2.51 AU OSX-Kleen
Blue Cat's MB-7 Mixer is a unique plug-in that splits the signal into several frequency bands and lets you mix them as if they were separate tracks.


Each band proposes controls that you can find on a mixing console, and more: bypass, mute or solo each band separately to isolate frequencies you want to work on, adjust the gain, the "stereoness" and the position in the stereo field. When manipulating the stereo image, a master mono switch also lets you check mono compatibility.

The plug-in can also operate as a multiband VST and Audio Unit host: you can process each band 
independently with your favorite VST or Audio Unit plug-ins! Up to four plug-ins can be loaded on 
each band, pre or post fader. Latency compensation, presets management, undo/redo integration, 
and individual plug-in bypass are included for optimal operation.

Changes in Blue Cat’s MB-7 Mixer v2.51

- Last loaded preset can now be quickly saved from the presets menu without having to select the file.
- VST: fixed latency compensation reporting in Cubase (no need to re-enable the plug-in to update the latency anymore).
- AAX and RTAS: fixed a feedback loop that could occur in bypass mode when the plug-in was inserted before another one.

home page:
http://www.bluecataudio.com/Products/Product_MB7Mixer/