Boz Digital Labs Manic Compressor v1.0.2B MAC OSX-Kleen
Soft / VST Instruments 28-11-2015
Boz Digital Labs Manic Compressor v1.0.2B MAC OSX-Kleen
Manic Compressor was designed from the beginning to be more than just a compressor. It was designed to unleash the power of parallel compression without requiring complex routing in your DAW.

Even with 6 different compressor modes and a comprehensive parallel routing setup, Manic Compressor uses an intuitive interface to get you way more power from your compressor than you’ve ever had before.

Maximum Parallel Power
Parallel compression is a key ingredient that has been used by top mixers for years, but up until now, it has always required complex routing and increased clutter in your mix project to be able to utilize it on every track. Many compressors have a mix knob for blending the compressed signal with the dry signal, but we have found that this just doesn’t give enough control to really make use of the extensive power of parallel compression.

With individual wet and dry faders, along with an intuitive yet powerful EQ section, it won’t take long to recognize how much you’ve been missing out on. After using Manic Compressor on our projects, we realized that we have been missing out on a whole new world that we didn’t even know existed with compression.

6 Different Compressors
Even with so many good compressors out there, we find that it’s cumbersome to switch back and forth between different compressors with different settings trying to find the exact match for your track. With Manic Compressor, you can quickly switch between 6 different compressors without having to match settings.

Because Manic Compressor was designed from the ground up to be used in parallel, we were able to make some compressor modes that really shine in parallel.

Built for Abuse
With Manic Compressor’s innovative parallel design and Loudness Relief, this compressor was built to be abused. Subtle compression is a thing of that past (unless you want it, of course). Manic Compressor lets you put your settings to maximum carnage and then ease it off with its unique Loudness Relief knob, which softens the compression artifacts even under super heavy load.

INSTALLATION:
– Copy cracked AU or VST into your Plug-Ins folder
– Copy Presets folder "Manic Compressor" into your Library>Application Support folder
– Enjoy!

home page:

http://www.bozdigitallabs.com/product/manic-compressor/
Related articles
Lindell ChannelX (All) OSX Plugins-0RGan1c Lindell ChannelX (All) OSX Plugins-0RGan1c
Soft / VST Instruments 19-11-2015
The Channel X bundle contains the 3 plugins :

6X-500 preamp / filters plugin
7X-500 FET compressor plugin
PEX-500 passive EQ plugin

Key features
Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode

Compatibility
Mac

AudioUnits : 32 bits, 64 bits
VST : 32 bits, 64 bits
VST3 : 32 bits, 64 bits
AAX : 32 bits, 64 bits
RTAS
Voxengo Deft Compressor v1.6.1.Incl.Keygen WiN/MAC Voxengo Deft Compressor v1.6.1.Incl.Keygen WiN/MAC
Soft / VST Instruments 14-11-2015
Deft Compressor is an audio signal compressor plug-in for professional audio production applications. The characteristic feature of this compressor is its ability to produce "slim” and "slick” sounding compression, with intelligibility enhancement effect. Such result is achieved by compressor’s timing function that closely resembles the S-curve (sigmoid curve) on both attack and release stages. S-curve timing function also helps compressor to sound "warm” and "clean” at most settings.

While at high attack settings Deft Compressor can be used to emphasize audio transients, it can also be used to "smash” audio signal if you use attack settings as low as 0.01 millisecond. Even though the S-curve is the marked feature of Deft Compressor, you can smoothly change it to a steeper L-shape by adjusting the "Punch” parameter.

Deft Compressor also features a so called "vintage” compression mode which produces compression sound reminiscent of analog tube compressors: it produces a warm, gently saturated sound with the ability to overdrive the output signal. Beside that, you may switch between the "feed-forward” and "feedback” compression modes. 

Deft Compressor is perfectly usable for compressing vocals, drums, guitars and other instruments, both technically and creatively. Beside that, it can be used to compress mix groups and full mixes.

Deft Compressor features:

Adjustable S-curve timing function
"Vintage” compression mode
Feedback compression mode
Auto make-up gain
External side-chaining
Key signal filtering
Stereo and multi-channel processing
Internal channel routing
Channel grouping
Up to 8x oversampling
64-bit floating point processing
Preset manager
Undo/redo history
A/B comparisons
Contextual hint messages
All sample rates support
Zero processing latency

Version 1.6 includes the following changes:

Fixed crash in WaveLab 8.5.
Implemented color scheme editor with load and save functions.
Added "Brown", "White" and "Cyan" color schemes.
Redesigned the infrastructure controls.
Made internal channel names start at "C" to reduce confusion with the A/B comparison buttons.
Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based
Soft / VST Instruments 11-10-2015
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.

The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.

An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.

The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.

All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.

The package includes a mono and a stereo version for optimal CPU usage.

Main Features:

- Full featured dynamics processor: compressor, gate, limiter, expander, waveshaper with a unique two thresholds system.
- Total control over the processor: continuous peak/RMS and Opto/VCA modes selection, peak envelope shape control, depth control to limit the gain range.
- Total control over the signal: dry/wet control for parallel compression, input and side chain filters.
- Stereo or mid-side processing with multiple channels linking options.
- Post brickwall limiter or clipper.
- Optimal monitoring: dynamics response, envelopes and gain reduction real time display with zooming capability. The main compression information can be recorded as automation curves.
- Best quality: up to 4x oversampling for the best sounding quality.
- Multiple side chaining modes: a unique way to perform side chain compression, ducking, gating and much more.
- Fully configurable user interface for optimal experience.

Blue Cat Audio Standards:

- Native DSP code for optimal performance.
- Full MIDI control and automation support with silent, zipper-free parameters update, advanced response control and MIDI Learn.
- No CPU load on idle: when the plug-in is fed with silence, the processing smoothly shuts down, to optimize the CPU usage of your Digital Audio Workstation.
- Skinnable and customizable user interface with transparency management.
- Automation and MIDI output: record output parameters as automation curves or send MIDI CC messages to other plug-ins for powerful side chain effects.
- Smooth Bypass: activate/deactivate the plug-in with absolutely no noise.
- Undo/Redo.
- Full featured integrated presets manager.
- Copy/paste the plug-in's state between instances using the system clipboard.
- Any sample rate supported.
Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched
Soft / VST Instruments 10-10-2015
The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ. 

Key features:

Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode
AudioD3CK SunRuys v1.7 Hy2ro AudioD3CK SunRuys v1.7 Hy2ro
Soft / VST Instruments 25-09-2015
SunRuys is an advanced compressor designed for you mix bus. It unusual feedback.forward typology gives it a precise yet smooth sound, rounded of by some subtle saturation.
Synthblitz Audio DNX 03 Multiband Compressor v2.0 Hy2ro Synthblitz Audio DNX 03 Multiband Compressor v2.0 Hy2ro
Soft / VST Instruments 13-09-2015
DNX-03 is a three-band stereo Compressor (win vst plugin) inspired by the analog models,
with some added features such as noise reduction and wide stereo control for
each individual freq-band.
The DNX-03 is able to split the incoming signal into three frequency-bands using a
6dB per octave crossover.

First-order filters are considered by many audiophiles to be ideal for crossovers.

Each band is passed through a compressor and then through a stereo processor
where compression,gain and stereo image can be altered and improved.
The outputs of the compressors and processors are then re-combined and
fed to the master output.

News V2.0

New compressors inside
New parameters for compression
New saturation system
New shortcuts
New Fine and Ultrafine Control for Knobs (improve controls for mastering session)
Four modes of operation
New Frequency band parameters (now 33Hz to 18.000Hz - full control sub and super-high)
New Vu Meter (virtual coil) over 6dB
New LED Meters (large scale) for reduction
New Vu Meter LED for output (large scale) over 8 dB
New numerical meters for dB RMS