Lindell ChannelX (All) OSX Plugins-0RGan1c
Soft / VST Instruments 19-11-2015
Lindell ChannelX (All) OSX Plugins-0RGan1c
The Channel X bundle contains the 3 plugins :

6X-500 preamp / filters plugin
7X-500 FET compressor plugin
PEX-500 passive EQ plugin

Key features
Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode

Compatibility
Mac

AudioUnits : 32 bits, 64 bits
VST : 32 bits, 64 bits
VST3 : 32 bits, 64 bits
AAX : 32 bits, 64 bits
RTAS

home page:

http://www.lindellplugins.com/products/ChannelX/
Related articles
Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX Wave Arts Tube Saturator v1.34 Incl Keygen WIN OSX
Soft / VST Instruments 14-11-2015
Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for "it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.
D16 Group Devastor 2 v2.00 [k] D16 Group Devastor 2 v2.00 [k]
Soft / VST Instruments 28-10-2015
Devastor 2 is the second generation of D16’s first FX Plugin from the SilverLine Collection series. Devastor is a deceptively simple yet remarkable Multiband Distortion Unit. It is an enhanced version of the distortion unit you can find in Phoscyon, but with full control over multiband processing. This elevates its sonic mangling capabilities to an entirely new level!

Structure

The plug-in consists of four essential blocks:
• Dynamics-flattener module (one-knob controlled input signal compressor)
• Diode-clipper distortion
• Three multi-mode filter sections
• Optionally activated signal limiter

The plug-in offers nine different connection topologies between its filters and diode-clipper. Filters can process the signal before or after it gets fed into the diode-clipper, but some of the configurations even allow the filters to work alongside the clipper, which greatly increases the possible sonic palette.

Devastor’s filters are not simply the peaking EQ type which are commonly used in classic multiband distortion units: rather, they are like those found in analog synthesizers (low pass, high pass, band pass and band reject) with adjustable resonance and cutoff parameters. As a result, Devastor has a completely unique sound. Just check out the factory content and hear for yourself!

Versatile and advanced
Devastor can be used to distort and enhance a wide range of sounds, from full-on acid synth sounds to guitar fuzz or an analog amp with speaker combo. It can even be used with drums to make them sound dirtier and more dynamic! Devastor isn't just good at creating distorted, monster sounds: it can also be used subtly to improve the timbre and character of gentler sounds. For example, reducing the preamp gain, increasing the threshold, and selecting a soft-knee for the dynamics will bring out more warmth and detail in a sound without introducing distortion.

When designing Devastor, we applied special antialiasing techniques to the output signal to make sure it was devoid of aliasing (one of the reasons why digital distortion units can sound so cold and un-musical). As a result, Devastor has a warm, musical, and very high quality sound.

We would like to invite you to listen the audio examples to whet your appetite and to check out the demo version for yourself if you need any more convincing. Devastor uses algorithms of such high quality that you'd be forgiven in a blind test for wondering if the sound has somehow been sent from the computer to an external analog distortion unit and back into the computer again!
Cytomic The Drop v1.0.6 WiN x86 x64 V.R-Based Patch Cytomic The Drop v1.0.6 WiN x86 x64 V.R-Based Patch
Soft / VST Instruments 20-10-2015
The Drop is an analog modeled resonant filter plug-in. It uses the same high quality algorithms used in circuit simulation packages but optimised for real time use. There is a huge level of detail in the models, which gives them amazing drive and tone. As well as the detailed circuit models more efficient algorithms are included for situations where CPU considerations are more important than tone, but even these models are of the highest quality.

Feature Summary

Dual stereo resonant filter with a Highpass into Lowpass
Seven different detailed circuit models
Stereo and Mono processing with either 2 or 4 poles
Loads of drive and character
Full frequency range and perfect resonance tracking without oversampling so there is no latency in processing
Huge amounts of resonance if you want and also "Safe" button for DJ use where screaming self oscillation is not desired
One basic and one advanced LFO capable of audio rate stereo modulation
Two analog modelled AHR envelopes that double as envelope followers, one for the cutoff and one for amplitude
FM from main audio input or sidechain audio input
DSP coded using C++ and SSE2, Interface coded using the Juce framework (C++)
Password protected copy protection

Circuit Modelling and DSP

Cytomic uses the same circuit modelling techniques that are used in professional circuit simulation packages but optimised for real time use. The structure including all feedback loops and useful non-linearities of the original circuit has been preserved. The algorithm uses actual values for resistors, capacitors, diodes, transistors and other circuit components. The voltages and currents are solved in real time and match as closely as possible to the analog circuit in both the time and frequency domains.
Rebel Audio OverToner v1.0 x32 x64 WIN Rebel Audio OverToner v1.0 x32 x64 WIN
Soft / VST Instruments 18-10-2015
The OverToner is a distortion VST plugin designed to expand the spectrum of your sound. You have the choice between 13 overtoning functions. The expanded output signal could be processed with a two band analog approximated band pass filter. It is possible to activate/deactivate and parameterize each filter band independently.

OverToner features

Two independent analog approximated output filters.
13 overtoning functions.
Smoothed controller fading.
Audio Assault FreaQ VST RETAiL Audio Assault FreaQ VST RETAiL
Soft / VST Instruments 13-10-2015
FreaQ is an uniquely designed analog mixing desk style equalizer.
Featuring super smooth analog low and high shelf filters,
2 fully parametric bell filters and 2 adjustable low pass / high pass filters,
FreaQ has everything you need to shape your instruments the way you want them.
Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched Lindell Audio Plug-ins Pack WiN x64 x86 VST3 Patched
Soft / VST Instruments 10-10-2015
The Lindell ChannelX bundle is more than your typical bundle. While on one level it is a collection of three amazing Lindell plugins, the 7X-500 limiter, the PEX-500 EQ and the 6X-500 preamp, it also includes the ChannelX plugin shell which allows you to run all three plugins in a single insert and even change the order that they appear in the signal path. Start off with the 6X-500 preamp to add a bit of punch and color, then add some tasty vintage FET compression with the 7X-500 limiter and then dial in some sweetness with the Pultec inspired PEX-500 EQ. 

Key features:

Pre

Faithful hardware circuit emulation of the Lindell Audio 6X-500 Module
Passive Pultec Equalizer
Transformer Balanced Input and Output
Precision 5 Slopes Low Pass and High Pass Filters
Analog Warmth and Non Linearities

Comp

Faithful hardware circuit emulation of the Lindell audio 7X-500 module
FET feedback compressor with classic 1176 sound
Mix control for parallel compression
3 step or continuous attack time
3 step or continuous release time
High pass side chain filter
3 step ratio: 4:1, 12:1 and 100:1 (all in)
Transformer balanced output
Adjustable stereo link
Analog warmth and non linearities

EQ

Faithful hardware circuit emulation of the Lindell audio PEX-500 module
Pultec Style Equalizer
Passive Eq design with a hybrid opamp gain make up circuit
Transformer balanced output
Analog warmth and non linearities
Mid / side stereo processing mode