Noise Makers Binauralizer v1.1 WiN/MAC
Soft / VST Instruments 17-11-2015
Noise Makers Binauralizer v1.1 WiN/MAC
Binauralizer is a spatialization plugin (VST, AU, AAX) providing :

- Full 360º panning with left/right and front/back effects
- Intuitive 2D pad for simultaneous control of source width and position
- Multiple input formats (mono/stereo/surround)
- One output format (binaural stereo)

Binauralizer uses Head Related Transfert Functions (HRTFs) specifically designed to simulate sound location/width with great accuracy and naturalness.

home page:
Related articles
Wave Arts Powersuite v5.84 x32 x64 WiN/MAC Wave Arts Powersuite v5.84 x32 x64 WiN/MAC
Soft / VST Instruments 14-11-2015
The Wave Arts Power Suite 5 Mixing & Mastering Plug-in Bundle introduces a powerful set of recording and mastering tools for your Audio Suite, RTAS, VST, MAS and DirectX compatible host software. Whether you are a professional or project studio engineer, sound designer or post production video editor, this set of 5 plug-ins deliver professional quality dynamics, EQ, limiting, multiband compression and panoramic processing to suite all of your mixing and mastering needs.

TrackPlug 5

10 bands of professional, 64-bit EQ
EQ band types: parametric, low/high shelf, analog low/high shelf, resonant low/high shelf, low-pass, band-pass, high-pass, or notch filter
Brickwall lowpass/highpass filter section
Third-octave spectrum analysis display
Dual multi-mode compressors and a gate
Clean, vintage, peak, and RMS dynamics modes
Sidechain EQ support on each dynamics section
External sidechain support (RTAS, AU and MAS)
Adjustable lookahead delays
Peak limiter
Comprehensive metering
Master preset manager and preset manager per section
Over 60 master presets, 30 compressor presets, 60 EQ presets, 10 gate presets
Latency compensation
Fully automatable
Up to 192K support
Mono or stereo

MasterVerb 5

Early reflection section- halls, rooms, plates, chambers, echo, cathedral, nightclub, ping-pong
Two late reverb algorithms - Hall (for all sizes of rooms) and Plate (for super dense plate reverbs)
3-band EQs for early and late frequency response adjustment
Early/late and wet/dry controls for adjusting mix
Triggered envelope control for special effects such as gated and reverse reverb
Graphical "character" control allows you to quickly adjust the size and decay time of the space
Time response plot showing delays, early reflections, late reverb, and envelope
3-D frequency response plot of reverb decay
Over 60 presets
No latency
Fully automatable
Up to 192 kHz support

FinalPlug 5 Peak Limiter / Maximizer

Sonically transparent peak limiting, use as mastering limiter or volume/loudness maximizer
Auto release control for greater sonic clarity
Bit depth truncation from 4 to 24 bits
TPDF dithering
Comprehensive noise shaping options, choose between 12 noise shapes
Presets for CD and DVD-audio mastering and track compression
Latency compensation via compatible hosts
Up to 192 kHz sampling rate
Mono or stereo

MultiDynamics 5 Multiband Dynamics

Up to 6 independent bands
Proprietary crossover filter network eliminates amplitude distortion between bands
6 dB/oct, 18 dB/oct and 30 dB/oct crossovers
Full featured compressor or expander/gate per band
Dynamics controls per band: Lo Gain, Thresh, Hi Gain, Ratio, Attack, Release, Knee
Per band and All band control editing
Clean (for transparent sound) and vintage (for analog colorization and warmth) dynamics modes
Per band Bypass, Solo and Mute controls
Comprehensive visualization of input levels and dynamic EQ response
Adjustable lookahead
No latency if lookahead is off
Latency compensation via compatible hosts
Up to 192 kHz sampling rate
Mono or stereo

Panorama 5

Position and move sound in three dimensions
Cartesian or polar coordinates
Uses Head-Related Transfer Functions (HRTFs) to reproduce binaural sound localization cues
Integrated reverberation and distance cues
Separate sections for early reflection modeling and late reverberation
Control dimensions and surface material of all six surfaces of the room
Early reflections are spatialized using HRTFs
Doppler pitch effect
Processing for playback over loudspeakers or headphones
Crosstalk canceling based on real head models
Ships with 10 human and 1 dummy-head HRTF set
Can load user-provided HRTFs
Full automation support for creating moving sounds
Up to 192 kHz sampling rate
Mono or stereo inputs (always stereo outputs)

Wave Arts has updated their plug-ins:

Power Suite - v5.84.
Master Restoration Suite - v5.84.
Tube Saturator 2 - v2.02.
Dialog - v1.34.
Tube Saturator (legacy version) - v1.34.

All formats:
Fixed missing mkl_wavearts.dll in Windows Dialog installer.
Fixed bug that could cause false noise learning trigger in Dialog and MR Noise.
Fixed Dialog limiter enable affecting compress section preset modified.
Increased size of MR Click event buffer to fix display with small audio buffer sizes.
Updated PN and TP section presets to fix missing section preset issues.
Tools->Use As Default now works properly, loads selected preset when GUI opens for the first time.
To cancel "Use As Default", select Tools->Use As Default menu item holding SHIFT key.
Fixed possible crash with Windows 64-bit plugs when closing GUI due to text edit window not deleted.
Main preset bar shows first preset matching current parameters, else modified preset with "*".
Section presets show first preset matching current parameters, else modified preset with "*".
TS2 now reports latency to host for delay compensation.

Install Instructions: At setup, choose Wave arts in License Method. NOT THE ILOK ONE. And not AAX (ILOK only) Run one of the plugins in your DAW, grab your machine code, run the keygen and generate a key code. Enjoy.
Voxengo PHA-979 v2.5.Incl.Keygen WiN/MAC Voxengo PHA-979 v2.5.Incl.Keygen WiN/MAC
Soft / VST Instruments 14-11-2015
PHA-979 is a professional audio AU and VST plugin which allows you to apply an arbitrary phase shift to sound material. What is meant by the phase shift here is simultaneous shifting of all frequencies across the active frequency range of the signal by the given value in degrees. This is achieved by linear-phase design.

PHA-979 is useful during mixing sessions, especially when working with the sound material recorded through an array of microphones. In many cases this allows you to solve various phasing problems arising from the microphone placement chosen during the tracking session. In other cases this process may help you to align drums and other instruments to each other bringing punch and time coherence not attainable by the ordinary time-aligning alone.

Beside the phase shifting, PHA-979 features positive and negative time delaying that eliminates the need to move in-track events in the sequencer when doing time alignment over any set of recorded tracks. PHA-979 also provides mid/side channel balance and panning controls that permit you to record stereo microphone pairs into a single stereo track without resorting to dual mono recording (on separate tracks) which usually becomes time-consuming in a further editing.

PHA-979 features multi-band analog-style correlation meter that greatly simplifies phase- and time-aligning process. Moreover, you can use functionality PHA-979 provides to setup headphone monitoring so that it closer resembles sound stage produced by stereo speaker monitoring.

PHA-979 features:

Arbitrary signal phase control
Linear-phase design
Multi-band correlation meter
Positive/negative time delaying
Delay time calculator
Mid/side channel balance control
Stereo output panning
Stereo and mono processing
64-bit floating point processing
Preset manager
Undo/redo history
A/B comparisons
Contextual hint messages

PHA-979 version 2.5 includes the following changes:

Implemented color scheme editor with load and save functions.
Added "Brown" and "White" color schemes.
Redesigned the infrastructure controls.
Added 90%, 110% and 150% visual scales.
Mark Studio 1.1.1 PC Mobile Device Editon-BEAT Mark Studio 1.1.1 PC Mobile Device Editon-BEAT
Soft / VST Instruments 7-10-2015
The Mark Studio 1 plugin has been designed to faithfully simulate the sound of Markbass amplification in any DAW application or live situation. No matter what kind of bass you use, the Mark Studio 1 plugin will always give you a very musical array of bass sound choices. It's an indispensable tool to anyone who records on a computer and wants to improve the sound of the bass either during or after recording.

Key Features
* Three top-class Markbass amp models: TA501, R500 and Classic 300
* Six Markbass cabinets: STD 151HR (rear-ported 1x15"),STD 152HR (rear-ported 2x15"), STD 104HR (rear-ported 1x15"),STD 104HF (front-ported 4x10"), STD 106HF (front-ported 6x10"), and Classic 108(sealed 8x10")
* Choice of 6 microphones, plus a preset combination of 2 front microphones
* Faithful reproduction of every characteristic and nuance of Markbass amps and cabinets
* Ultra-flexible signal path makes it easy to balance the Direct (plugin) input, Line Out (amp direct Out) and Mic Output levels
* More than one microphone can be used simultaneously: main (woofer), tweeter and, where applicable, rear bass reflex (port).
* Each mic/cabinet combination has been recorded in a high-end studio by the best Italian sound engineers
* Ultra Bass frequency control for extra-deep sound with one mouse click
* 64 factory presets designed by top engineers and Markbass artists and 64 storable user presets
Longcat H3D Binaural Spatializer VST v1.0.0-ST3RE0 Longcat H3D Binaural Spatializer VST v1.0.0-ST3RE0
Soft / VST Instruments 7-10-2015
3D audio spatialization for all!. LogoH3DThe H3D plugin allows you to 3D mix audio tracks from your digital audio software (Cubase, Nuendo, Live...) and to obtain incredible spatialization effects. Sounds then seem to come from every possible direction, using standard audio headphones. Especially aimed at musicians or podcast producers, H3D inserts in major PC audio workstations (Cubase, Live, Pyramix, Nuendo, Reaper...) and displays all audio sources in a simple, visual 3D interface that is easy to manipulate.


* H3D_3dView3D object-audio mixing - use the 3D interface to place and easily animate sounds
* Longcat Audio H3D technology - when listening on headphones, H3D allows panning sound in 3D all around the listener's head.
* Unique HRTF processing - H3D uses Longcat own processed HRTF filters in order to achieve the best spatialization effects.
* H3D Presence - independently adjust H3D's immersion effect using the Presence parameter.
* Automation - fully automate parameters and 3D animation of audio tracks.
* No tedious settings - Just insert H3D plugins and start moving sounds in 3D!
SoundHack Spectral Shapers VST v1.52 x86 x64 incl.Keygen SoundHack Spectral Shapers VST v1.52 x86 x64 incl.Keygen
Soft / VST Instruments 24-09-2015
Tom ErbeÆs Spectral Shapers 

A four plugin bundle emphasizing spectral filtering, using variable sized FFTs.

This filter places a sound at a specific position 
around the listenerÆs head. Use it with a reverb to 
create a virtual environment. When used with itÆs LFO, 
+binaural can place various beats or parts of a loop 
in specific repeatable positions. 

Holds two filter shapes. These shapes are set by 
drawing, or by capturing the spectra from the incoming 
sound. You can morph between these two filters. 
+morphfilterÆs depth control can change the strength 
of filtering, or even invert the filter for an 
ôanti-filteredö sound. 

Performs smooth timbral filtering. Can be used to tame 
resonant frequencies or for radical changes of tone. 
In expansion mode, +spectralcompand becomes a highly 
tunable broadband noise remover, capable of removing 
hiss, hum and machine noise, without damaging the 
original sound. 

A spectral version of t he noise gate/ducker dynamics 
processor. +spectralgate combines a noise gate/ducker 
and a multiband processor to give you a plugin that 
can used both as a frequency dependent gate or as a 
level dependent filter. 

Installation : 

1) Unrar and install 

2) Use keygen to register 

3) Say thanks to AiR for their Keygen and hard work
Synthblitz Audio DNX 03 Multiband Compressor v2.0 Hy2ro Synthblitz Audio DNX 03 Multiband Compressor v2.0 Hy2ro
Soft / VST Instruments 13-09-2015
DNX-03 is a three-band stereo Compressor (win vst plugin) inspired by the analog models,
with some added features such as noise reduction and wide stereo control for
each individual freq-band.
The DNX-03 is able to split the incoming signal into three frequency-bands using a
6dB per octave crossover.

First-order filters are considered by many audiophiles to be ideal for crossovers.

Each band is passed through a compressor and then through a stereo processor
where compression,gain and stereo image can be altered and improved.
The outputs of the compressors and processors are then re-combined and
fed to the master output.

News V2.0

New compressors inside
New parameters for compression
New saturation system
New shortcuts
New Fine and Ultrafine Control for Knobs (improve controls for mastering session)
Four modes of operation
New Frequency band parameters (now 33Hz to 18.000Hz - full control sub and super-high)
New Vu Meter (virtual coil) over 6dB
New LED Meters (large scale) for reduction
New Vu Meter LED for output (large scale) over 8 dB
New numerical meters for dB RMS