SPC-Plugins Gater-Pro Advanced v4.0 Ked MacOSX
Soft / VST Instruments 2-11-2015
SPC-Plugins Gater-Pro Advanced v4.0 Ked MacOSX
Gater–Pro: Advanced Stereo Trance Gate

-Stereo gate patterns with 16 steps or "linked” gate patterns with 32 steps.
-Three adjustable gate shapes: gate, ramp and trapezoid. Gate width variable from 0–100 percent; ramp variable from falling to rising; trapezoid variable from gate to triangle.
-Swing -99 to +99 percent. Greater control resolution near zero.
-Seven rates, including bypass (for cutting the effect in and out with one control): bypass, 1/4, 1/8, 1/16, 1/32, 1/64 and 1/128.
-Mix.
-MIDI controller learn.
-"Freewheel”: gate pattern continues even when host sequencer stops.

Please test! The AU works fine but the VST crashes often here.

home page:

http://www.spcplugins.com/gater-pro
Related articles
DMG Audio Expurgate v1.0.0 OSX-Kleen AU DMG Audio Expurgate v1.0.0 OSX-Kleen AU
Soft / VST Instruments 2-11-2015
A New Level of Precision - Meet Essence's ninja sister!

Expurgate is the most advanced noise-detecting, circuit modelled, MIDI sample accurate, 
zero-latency, ultra-fast, lookahead, linear-phase sub-band gate.

The Expurgate Story

Expurgate is a fully-featured gate/expander, with all the customary DMGAudio trimmings.

Let's be honest - gates are not the most exciting of processors, but they are hugely useful. So I've tried to make Expurgate as exciting as possible by including a selection of favourite gate designs. We've tried to make it as quick to use as possible by streamlining the interface, and including a flexible sidechain EQ with spectrum analyser. I've made it as gentle on the CPU as possible whilst still sounding fantastic and also including extra options for more demanding applications to invoke more processing power.

The inclusion of a signal/noise detector can make some tasks, like breath gating, extremely quick to get good results with. Adding sub-band processing means you can use it for tonal and dynamic shaping. The sample-accurate MIDI handling is pretty neat for creative uses, as is the distortion characteristic of using extremely low attack and release times when the safety is off.

We're fairly sure this is the most sophisticated and flexible gate around. As we strive for in our designs, it allows you to get the job done quickly and well. And as always, if you want to go deeper, the options are all there.

If that's too much to consider, set the threshold and Expurgate your noise!

Overview
• State of the art gating and expansion.
• Noise detector for automatic gating.
• Quick, simple, ergonomic interface.
• Circuit models of classic gates.
• Configurable from zero-latency, ultra-low CPU to oversampled ultra-high resolution.
• Ultra-low attack times when the safety is disabled.
• External sidechain for triggered gating.
• Global Bypass for all instances in a session.
• Sample-accurate MIDI triggering as gate or ducker.
• Three-band sidechain EQ, and massively configurable Split EQ.
• Separated mode, allowing fine mixing control.
• Per-channel or ganged control.
• M/S and L/R processing
• Large, intuitive time-plot.
• Windows VST, VST3 and AAX as 32+64bit, RTAS 32bit
• Mac VST, VST3, AU and AAX as 32+64bit, RTAS 32bit

Sound
• Linear Phase crossover (Split) EQ
• Zero-latency minimum phase mode, with Linkwitz-Riley crossovers.
• Variable lookahead to avoid losing transients.
• Oversampling mode to eliminate intermodulation distortions.
• Full mixer section.
• Ducking and upwards compression.
• Threshold, Ratio, Soft-knee, Gain-Reduction Depth and Hysteresis.
• Variable Stereo linkage.
• Complete set of Listen options for monitoring, including signal difference (output-input).
• Automatic detection of noise in signals.

Vision
• Simple three-control interface.
• Advanced section for precision control.
• Spectrum analyser for tuning sidechain EQ.
• Time-plot to highlight signal detection.
• Freely-resizable UI.
• Mac Retina support.
• 8 A/B banks.
• Intelligent Undo/Redo.
• Ergonomic channel linkage system.
• Autolisten for configuring filters.
Xfer LFOTool v156 Upd [R] MacOSX Xfer LFOTool v156 Upd [R] MacOSX
Soft / VST Instruments 15-10-2015
LFOTool is an FX utility plug-in for both Macintosh OS X® and Windows®. It empowers music producers to create tremolo, auto-pan, trance-gate, side-chain compressor simulation, and dubstep-type wobble effects with minimal effort.

Features

- LFO with customizable point+tension-curve editor, 12 graphs in a preset (switchable via MIDI notes or automation)

- up to 5 graphs simultaneously (Cutoff/Reso/Pan/Var/Volume)

- graph preset shapes from a drop-down menu, able to save your own

- can optionally send MIDI CC out to control other softsynths, effects, or external hardware which responds to MIDI CC messages.

- BPM (with optional swing) or Hz LFO rate control

- sample-accurate sync

- dozens of presets included

- both Mac OSX and Windows versions included

- 64-bit VST and AudioUnit support
Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based Blue Cat Dynamics 4 x86 x64 Incl Patched R2R-Based
Soft / VST Instruments 11-10-2015
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.

The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.

An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.

The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.

All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.

The package includes a mono and a stereo version for optimal CPU usage.

Main Features:

- Full featured dynamics processor: compressor, gate, limiter, expander, waveshaper with a unique two thresholds system.
- Total control over the processor: continuous peak/RMS and Opto/VCA modes selection, peak envelope shape control, depth control to limit the gain range.
- Total control over the signal: dry/wet control for parallel compression, input and side chain filters.
- Stereo or mid-side processing with multiple channels linking options.
- Post brickwall limiter or clipper.
- Optimal monitoring: dynamics response, envelopes and gain reduction real time display with zooming capability. The main compression information can be recorded as automation curves.
- Best quality: up to 4x oversampling for the best sounding quality.
- Multiple side chaining modes: a unique way to perform side chain compression, ducking, gating and much more.
- Fully configurable user interface for optimal experience.

Blue Cat Audio Standards:

- Native DSP code for optimal performance.
- Full MIDI control and automation support with silent, zipper-free parameters update, advanced response control and MIDI Learn.
- No CPU load on idle: when the plug-in is fed with silence, the processing smoothly shuts down, to optimize the CPU usage of your Digital Audio Workstation.
- Skinnable and customizable user interface with transparency management.
- Automation and MIDI output: record output parameters as automation curves or send MIDI CC messages to other plug-ins for powerful side chain effects.
- Smooth Bypass: activate/deactivate the plug-in with absolutely no noise.
- Undo/Redo.
- Full featured integrated presets manager.
- Copy/paste the plug-in's state between instances using the system clipboard.
- Any sample rate supported.
SoundHack Spectral Shapers VST v1.52 x86 x64 incl.Keygen SoundHack Spectral Shapers VST v1.52 x86 x64 incl.Keygen
Soft / VST Instruments 24-09-2015
Tom ErbeÆs Spectral Shapers 

A four plugin bundle emphasizing spectral filtering, using variable sized FFTs.

+binaural: 
This filter places a sound at a specific position 
around the listenerÆs head. Use it with a reverb to 
create a virtual environment. When used with itÆs LFO, 
+binaural can place various beats or parts of a loop 
in specific repeatable positions. 

+morphfilter: 
Holds two filter shapes. These shapes are set by 
drawing, or by capturing the spectra from the incoming 
sound. You can morph between these two filters. 
+morphfilterÆs depth control can change the strength 
of filtering, or even invert the filter for an 
ôanti-filteredö sound. 

+spectralcompand: 
Performs smooth timbral filtering. Can be used to tame 
resonant frequencies or for radical changes of tone. 
In expansion mode, +spectralcompand becomes a highly 
tunable broadband noise remover, capable of removing 
hiss, hum and machine noise, without damaging the 
original sound. 

+spectralgate: 
A spectral version of t he noise gate/ducker dynamics 
processor. +spectralgate combines a noise gate/ducker 
and a multiband processor to give you a plugin that 
can used both as a frequency dependent gate or as a 
level dependent filter. 

Installation : 
-------------------- 

1) Unrar and install 

2) Use keygen to register 

3) Say thanks to AiR for their Keygen and hard work
Kuassa Cerberus Bass Amp v1.0.1 VST VST3 x86 x64-CHAOS Kuassa Cerberus Bass Amp v1.0.1 VST VST3 x86 x64-CHAOS
Soft / VST Instruments 7-09-2015
Cerberus Bass Amplifikation will provide the warmth and mellowness of tube amp, clarity and punch of solid-state power, or turn it up to destruction on the Drive amp type. For further tweaking, Cerberus Bass Amplifikation gives you tonal control through its compressor, contour control, parametric and graphic EQ, and D.I. wetness control. Carefully tuned and carrying enough power to rumble your studio.

Cerberus Bass Amplifikation also comes with features standard to Kuassa’s other amp products; noise gate, and dual cabinet miking modeler. In addition, the Rack Extension version features a handful of CV input controls, while the VST/VST3/AU/AAX version will have an external IR loader and a 3D miking interface.

Cerberus Bass Amplifikation: Take charge of the bottom frequency, directly from your DAW.
Blue Cat's Dynamics v4.0 MAC OSX-Kleen Blue Cat's Dynamics v4.0 MAC OSX-Kleen
Blue Cat's Dynamics is a full featured dynamics processor: it can be used as a compressor, limiter, gate, expander, waveshaper or all at once! The dynamics response of the plug-in can be tweaked with a unique two-thresholds system, and provides detailed visual feedback about its behavior.

The plug-in includes several filters to control the frequencies affected by the compression. Its continuous VCA/Opto and Peak/RMS controls let you smoothly and precisely choose the behavior of the envelope detection like you have never been able to.
The plug-in also provides advanced stereo features, with mid/side processing capability, multiple stereo linking options and the ability to choose the channels affected by the processor.
An additional brick wall limiter and clipper protects the output for complete control over the dynamics response.

Three different modes are available for external side chaining, using either the external side chain input, MIDI control or automation lanes.
The configurable visual feedback shows every detail of what is going on inside the plug-in. You can also record this information as automation curves, to monitor the modifications applied to the signal on top of the audio representation of your favorite host application.
All these features can be controlled from a fully configurable and "skinnable" user interface, or from any external controller.
System Requirements Mac OS X:

An Intel processor.
Mac OS X Yosemite (10.10), Mavericks (10.9), Mountain Lion (10.8), Lion (10.7), 
Snow Leopard (10.6), or Leopard (10.5).
Any VST / Audio Unit (32/64-bit) / RTAS / AAX compatible application.