Soundsdivine MM+ KONTAKT-SYNTHiC4TE
Soundsdivine has launched MM+, a virtual synthesizer library for Native Instruments Kontakt based on the Moog Memorymoog.
2 Aux Envelopes.
1 Programmable Arpeggiator.
3 Monophonic Pitch Sequencers.
2 Additional Sequencers.
25 Custom Impulse Responses.
5 FX inc. Transient Shaper / Phaser / Delays & Reverb.
6.97GB (compressed) samples from the Moog MemoryMoog.
The Last Haven Subtle Piano KONTAKT
The native sound of synthesizer grand piano comes to Kontakt. Carefully sampled and unprocessed, it will perfectly lay in any mix, varying from dreaming to bright pop and rock.
....:::: Features ::::....
• Recorded In 24Bit, 48kHz Format (Compressed Into NCW Samples)
• Comes With Native Reverb Sound
• Includes Compressor, 3-Band Equalizer, Additional Reverb And Snapshots
• Requires: NI Kontakt 5.5.0+ And 630 MB Free on Hard Drive
Wave Alchemy Mutate KONTAKT
Introducing Mutate, our next generation virtual hybrid synthesizer for Kontakt 5!
Twist, mangle and transform unique multi-sampled waveforms to create powerful abstract Dubstep bass, twisted Techno sequences, morphing growls, Mainroom EDM bass / leads, cone-melting subs, lush chords, warm analogue bass and everything in-between...
Combine complex evolving tones and ‘mutate’ them into oblivion with powerful parameter lock sequencers and extensive on-board processing / FX...
Mutate is powered by a 3.7GB core library of unique raw waveforms and pre-designed preset multi-samples, synthesized from the ground up, and recorded directly from a huge hybrid analogue / digital Eurorack modular synth system. In essence this means that as a producer, sound designer or programmer you have access to a truly diverse tapestry of creative sounds and building blocks, before you have even touched Mutate’s creative on-board parameters!
We feel that the raw, vibrant tones of Mutate are an essential addition to any electronic music producer's toolkit...
Please note: This instrument does NOT work with the Free Kontakt Player. A full version of Native Instruments Kontakt 5.2.1 (or above) is required to run Mutate.
Click here to download the Mutate manual
Mutate ships with two separate instruments; the 'Raw Waveforms' instrument and the 'Designed Presets' Instrument.
Raw Waveforms Instrument
The 'Raw Waveforms' instrument is powered by 2730 multi-samples spread across 46 waveform patches. Up to four oscillators (plus noise oscillator) can be mixed, panned and tuned to create unique layered, synthesized sounds.
Designed Presets Instrument
The 'Designed Preset' Instrument is powered by 6305 perfectly looped multi-samples, spread across 142 expressive, evolving patches which are ready to use straight out of the box; with filter settings, modulation, and envelope settings recorded straight from the modular Eurorack system.
Both instruments feature Sequencer and FX edit pages;
At the heart of Mutate you will find a 32-step, 16 track, variable rate ‘parameter lock’ sequencer, allowing you to automate; note pitch, volume, note length, attack, filter cut-off, filter resonance, filter LFO depth, Filter LFO rate, stereo spread, distortion levels, reverb send and delay send individually, per step! When used with the instruments ‘shuffle’ function, anything from subtle sample and hold type effects to completely insane, morphing sequences can be created. This is where things get really interesting!
The FX page has selectable modulation effects (switchable between Flanger, Phaser and Chorus) alongside a custom Reverb and Delay unit
What's Included in the Instrument?
3.7GB core waveform library consisting of 9,035 multi-sampled 24-bit WAV samples.
Heavily scripted Kontakt 5 instrument and intuitive graphical interface (requires full version of Kontakt 5.2.1, or above).
'Designed Presets' instrument featuring 142 creatively synthesized, cutting-edge multi-sampled patches recorded and designed with a high-end Eurorack modular synth set-up.
'Raw Waveforms' instrument featuring 4 programmable oscillators (+ 1 noise osc), each with 46 selectable 'waveforms' - designed individually using a mixture of analogue and digital oscillators from the Eurorack modular.
151 ‘Designed Presets Instrument’ presets.
20 ‘Raw Waveforms Instrument’ presets.
Multiple filter types, custom on-board effects and impulse responses, extensive modulation routings and 3 LFOs .
Sequence pitch, volume, note length, sample start point, filter cut-off, filter resonance, filter LFO depth, Filter LFO rate, stereo spread, distortion levels, reverb send and delay sends individually, PER STEP!
Switchable mono, legato and polyphonic keyboard modes.
Unison and stereo width effects.
Saturation and bit-crusher effects
Mutate was driven by the desire to create a truly unique ‘Bass Machine’ synth capable of twisting waveforms 'inside-out' using extensive modulation and sequencer parameter lock techniques.
From the start it was our mission to push Kontakt’s scripting capabilities to the limit, to deliver a synth with an experimental edge, capable of devastating, evolving sounds for the bass heads.
Sonokinetic Berimbau KONTAKT
Sonokinetic’s Berimbau is based on over 200 samples of two traditional berimbau instruments from Brazil, one made of biriba wood and one made of fiberglass. The library can come in handy for making traditional Brazilian music, of course, but it can also work great for cinematic music and for spicing up synthetic percussion loops. The sounds are completely royalty and copyright free, however they are compressed to NCW format which is exclusive to Native Instruments Kontakt (there are no WAV files in the download pack). The library is not compatible with the free Kontakt Player, meaning that it will only work for fifteen minutes in the free version of Kontakt.
The customized user interface for Kontakt is quite simple but also very useful, providing direct access to three different microphone positions, quick tuning settings, a 3-band equalizer and the convolution reverb effect that is pre-loaded with a custom impulse response. Everything else is controlled directly via key switches. The download pack includes a user manual which explains how to control the round robin samples and get a natural sounding performance.
CL-Projects Hypernova KONTAKT
is the new 'Top of the line' Kontakt synthesizer from CL-Projects. Based on a well known polyphonic synthesizer from the late 90's that was capable of emulating Minimoog, Jupiter 8, Juno 106 and ARP 2600 sounds. The Hypernova Kontakt synth is no different. It can also emulate classic synthesizer sounds, making use of sampling technology instead of the virtual analog and substractive technology the original synth used. Hypernova is a 3 oscillator synthesizer which uses 50 different sound sets per oscillator. The sounds were sampled without the filter, LFO and effects settings. All the sounds were recreated with the Kontakt's filters, LFO's and effects. Hypernova is therefore an ideal tool for sound designers and musicians who want to make their own sounds.
THE CONTROLS PAGE
contains the parameters to completely alter and edit the sound. The Hypernova synthesizer has a 3 oscillator architecture. All the parameters on the controls page are available for the 3 oscillators seperately. Four different waveforms can be selected for each oscillator: square, saw, noise and special. The special waveform is a choice between 50 different waveforms, selectable via a menu. Each oscillator has level, pan, tuning and modulation parameters. The global section contains the parameters that affects all three oscillators at once. On the the top left are the poly, solo, legato and offset settings with the possibility to change the note order in which the notes are played when set to solo, legato or offset: last, next, low and high. On the top right you can find the Portamento and Unisono parameters. The filter section contains 5 different filters of which 4 are ladder filters known for their Moog like character and the fifth filter is the well known Pro53 filter. Each filter has its own frequency and resonance setting, also accompanied with their modulation settings for velocity, modwheel, pressure and key track. The envelopes section contains three different envelopes for amp, filter and pitch each with their own presets. Last but not least there is a very extensive LFO section. Each oscillator has an LFO for pitch, filter, level and pan with a choice between four different waveforms: square, saw, tri (triangle) and s/h (sample and hold).
THE EFFECTS PAGE
contains 7 different effects. A convolution reverb with a choice between 7 different spaces: chamber, room, hall, church, plate, spring and gate. Other effects are delay, chorus, flanger, phaser, distortion and a 3-band equalizer, each with their own effect presets.
THE ARP & MODS PAGE
exists out of a 64 step arpeggiator with a random arp generator. Beneath the arpeggiator there's a small mod section where you can change the bend range, the pitch LFO and level LFO sensitivity for the modwheel and pressure for the three oscillators.
This includes Pulsar Project from SubsonicArtz
Pulsar Project consists of more than 100 new free patches (instruments and multis).
The full version of HYPERNOVA is required to run this add-on.
GBR Loops Edmiere KONTAKT
GBR Loops has announced the release of Edmiere, a free loops library for Native Instruments Kontakt.
EDMIERE is Kontakt instruments for EDM Music. EDMIERE gives you some basic Chord, Synth, Lead, Bass,Pad etc.
To use the library, you must first ensure that you have the full version of Native Instruments KONTAKT 5.5.1 (or higher)
Nicolas Signat Alive Littles V1 KONTAKT
Here's your new sandbox full of toys! 88 instruments are waiting for you inside the main Kontakt patch. All samples have been recorded very close with high-end equipment (Nagra LB, KM185, Blue Dragonfly, AT4050, Rode NT4) in high definition (88.2kHz 24bit) in dry rooms.
Every sample is 'alive' and dynamic due to 10 random robins for every recording! Our GUI gives you access to a lot of transformations and modulations, all based on velocity. You can set filters, pitch, stereo effects and panning, ADSR envelope, play in reverse, offset and volume sound by sound.
You can choose to use random robins or not. Moreover, we added some great global effects on a second tab with a transient designer, EQ, flanger, chorus, phaser, tape saturator, lo-fi (bit crusher) and reverb.
• 5 main patches which are presets for the whole sandbox.
• 32 chromatic instruments
• 19 sound design patches made from the same sample pool!
The Sound Designer patches are unique little instruments in their own right. We will try and produce some examples of these as soon as we can.
NOTE: For the full retail version of Kontakt 126.96.36.199 or above only. Will only work in 'Demo' mode if you have the free version of Kontakt Player.