MeldaProduction MAudioPlugins v9.10 Incl. Crack and Keygen R2R
Turn your computer into a professional studio!
MeldaProduction MTotalBundle is the ultimate collection of effects, and it currently contains 82 of them. MTotalBundle will convert your computer into a top-class professional sound studio.
EVERYTHING YOU NEED
MTotalBundle contains all of our effects covering all required tasks: composing, mixing and mastering. With our included free for life updates, any new effect we release moving forward will be free for you! And it takes just a few clicks using our update system...
UNIQUE SUPER-MODERN TECHNOLOGIES
The bundle contains traditional plugins as well as our revolutionary technologies, which give you the power to make your recordings sound incredible even if you haven't spent last 50 years as an audio engineer. High speed, simplicity, crystal clear sound and minimal noise level is standard in MeldaProduction.
MTotalBundle 9.10 changes:
MXXX officially released.
Number of MXXX lanes increased to 6.
Position indicator in low frequency oscillators is now optional (can be disabled from the right-click menu).
Added "No reset" switch to MLoudnessAnalyzer.
Improved ADSR editor units including sync units.
Added Scroll automatable parameter to MNotepad, which you can use to automate/MIDI control the text scrollbar.
MXXX category Reverberation renamed to Delay & Reverb.
Moving an equalizer band now shows all basic parameters about the band.
Clicking a middle button on an FX in MXXX shows it as popup window.
Added Report Latency FX to MXXX, which reports latency, but doesn't actually cause any, so it can be used to virtually move to the future.
Latency reporting in MXXX FX's title is now updated everytime a restart is caused (host playback restart, panic button...).
Added "Maximum - Average" graph for all analyzers, which lets you investigate the dynamics of the material.
Added "Mute until ALC" option to MCompare, which lets you avoid bursts of high loudness signals if you compare signals with extreme differences in loudness.
Normalize feature in all analyzers now performs at most +60dB gain increase, which is better when analyzing audio with silent segments.
Infinite averaging analyzer now ignores places with level below -80dB (spectrally).
Fix: MXXX could crash after saving an active preset.
Fix: Restarting playback could make some equalizers send automation.
Fix: MDynamics, MMultiBandDynamics and MSpectralDynamics custom shape didn't update when modulated unless a different parameter has been touched.
Fix: Loading equalizer with more bands than before could cause some nonexistent bands left loaded.
Fix: Preset trigger control parameters didn't do anything.
Fix: Pasting a modulator didn't update the mod button visual state immediately.
Fix: Favourites in directory selectors didn't work if desktop or any other standard directory has been selected before.
Thanks a lot for this great work to R2R. Until the Update 9.10 (With inside MXXX-Plugin)the R2R patch is working good. Since 9.11 Update there is something changed and the patch dont work anymore. But in this way everyone can use this great software (with update 9.10), given to us for testing by R2R. Thanks really a lot for all the great work for the whole music community.
Faber Acoustical Electricoacoustics Toolbox 3.8.2
Electroacoustics Toolbox is a modularized, multi-channel dynamic signal analyzer and data acquisition platform for Mac. It brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems. It enables precise measurements of acoustic quantities, such as equivalent and time-weighted sound levels, as well as acoustic and electroacoustic systems, such as listening rooms and loudspeakers. The software is designed to work with any Mac-compatible audio hardware and supports multiple channels of 8, 16, 24, or 32-bit data with sample rates as high as the hardware will support.
Dual FFT Analyzer (TF/IR analyzer)
Octave Analyzer (RTA)
Sound Level Meter
Frequency response magnitude and phase
Auto and cross correlation
Time delay (latency)
Signal-to-noise ratio (SNR)
Total harmonic distortion (THD, THD+N)
Crest factor and rms, peak, and peak-to-peak signal levels
Signal mean, variance, and standard deviation values
Flat, A, and C-weighted equivalent (Leq), time-weighted (Lp), and percentile-exceeded (Lx) sound levels
Electroacoustics Toolbox is a project-based application, which allows you to configure and save project files. Projects may contain one or more tools available in the toolbox, along with any captured data associated with those tools. Electroacoustics Toolbox allows for the creation of an arbitrary number of tools of a certain type, or tools of different types. For example, a project may contain an oscilloscope, two FFT analyzers, and two signal generators. The oscilloscope and FFT analyzers may each simultaneously analyze multiple input channels of a single device. However, there is no requirement that all tools must work with the same device. The Toolbox also offers advanced capabilities for configuring input and output device parameters and assigning labels, units, and transducer sensitivities to individual input and output channels.
Hardware-accelerated OpenGL graphics for fast real-time plotting
Quartz-based graphics for high-resolution still images and prints
Advanced control over input and output devices
Whole device and individual channel sensitivity (level) calibration
Support for units, including Volts, Amps, pascals, and Engineering Units
Saving complete configurations and data in project files
Exporting data to ascii text or MAT-files for easy import into other applications
Work with multiple independent audio devices simultaneously
No arbitrary limits on how many devices or channels are used, or on sample rates or signal formats--these are limited only by your hardware
AppleScript support for measurement automation and remote control
Xfer Records Serum v1.06 b8 Update MAC
The dream synthesizer did not seem to exist: a wavetable synthesizer with a truly high-quality sound, visual and creative workflow-oriented interface to make creating and altering sounds fun instead of tedious, and the ability to "go deep” when desired - to create / import / edit / morph wavetables, and manipulate these on playback in real-time.
fixed: WIN: preset files with invalid windows chars such as question mark were causing crash in preset browser
fixed: WIN: preset browser was not removing removed/deleted preset files from the list
added: MENU-> Render OSC (a/b) takes the current Wavetable frame and creates 256 frames spanning 0-100% of the Warp knob
added: Menu-> Reasample to Osc (A/B): "plays” a note of the preset for 1 bar, captures (renders to RAM) and imports as wavetable.
added: program change bank message support:
0 = no bank message = program change list
StageCraft Software Free Plugins
A quantizing, dual band Delay designed with EDM music in mind. Our delay is the only one out there to show you the spectrum response as you play, so you can literally see the effect it has on the audio.
SC Bitcrusher is a full-featured bitcrusher plugin that lets you control bit rate, rate reduction, and stereo spread (with stereo field visualization). We’ve also added a filter section that allows you to add filtered noise to the mix.
SC Autofilter gives you all the essential functionality you would expect from an autofilter, along with features designed specifically with the DJ/electronic musician in mind. Parameters are fully automatable, quantizable, and a display showing filter response and output FFT allows you to see the filter’s effect in real-time
NYRV Systems Agent v184.108.40.206 Incl Patched and Keygen-R2R
NYRV AGENT is NYRV Systems first product offering and is designed to become the central element of your effects processes. AGENT is fundamentally a configurable virtual control surface for effects. With AGENT you gain control of your entire effects chain in a single interface. AGENT has a Channel Strip page and an Effects Rack page. They are essentially identical but we designed them to work together the way a rack of outboard effects would interact with a large format console channel strip.
A Unified Interface Connecting A World of Plugins
AGENT provides you the canvas where you create a custom workspace and workflow. You now have the ability to configure each channel strip with up to 16 plugins and 96 parameter controls. The result is a working environment that let’s you focus on the sound instead of trying to find the individual controls that affect it.
Effect Chains Compatible With Most Major DAW's
AGENT allows you to host VST and AU plugins in the same instance. Your customized channel strip and effects racks are now presets that can be loaded into any DAW including Pro Tools. Imagine having the ability to create the perfect effects chain in your favorite DAW using VST and Audio Units Plugins and being able to use it in Most Major DAW's. You now have the ability to port tracks in between DAWs and never lose the ability to use your saved channel strip.
Simple Powerful Routing
The internal routing feature allows you to adjust such components as: wet/dry mix, gain, signal path or your effects chain.
Swap your channel strip and effects rack and your effects can emulate a pre or post position on the track.
Acoustica Premium Edition 6.0 Build 19 Incl.Keygen + PORTABLE
Acoustica is a comprehensive solution for professional audio recording, editing, mixing and mastering. The intuitive user interface was designed with speed, accuracy and ease-of-use in mind and gives access to a large set of powerful tools to make your recordings sound the best. The consistent workflow simplifies your production work all the way from recording, editing, batch processing, sound design and audio restoration to Red Book compatible CD burning.
Acoustica 6 is available in three editions – the free Basic Edition, the Standard Edition and the Premium Edition which supports 5.1 and 7.1 channel surround and includes extended processing tools and the same audio restoration algorithms as found in our Restoration Suite.
Ultimate Audio Quality
Acoustica offers support for state-of-the-art audio resolutions up to 32 bit and sampling rates up to 384 kHz, ensuring that all of your work comes across at the highest quality. Acoustica Premium Edition even supports multichannel audio recording and editing such as 5.1 and 7.1 surround sound.
Integrated audio restoration tools help you get the most out of recordings impaired by background noise, clicks, crackle, clipping or missing high frequency content. The Premium Edition contains the same set of professional tools as our Restoration Suite.
New in Acoustica 6 is the ability to edit multitrack audio. Both the Standard and the Premium Edition allows you to mix audio from different tracks in real-time, add audio effects to tracks or easily create cross-fades. You can even loop or time stretch clips directly from the multitrack timeline.
High quality audio tools and effects are integrated such as dynamic processing, limiter, equalizing, reverb, convolution reverb, chorus and flanger. You can also modify tempo and key of your recordings independently using the superb quality time stretching and transpose tools.
Effect Chains and Plug-In Support
You can create complete chains of processing tools, including external plug-ins, and save them along with all the parameter settings for later use. VST and DirectX plug-in support allows you to access a vast number of both free and commercial third party audio processing plug-ins directly from Acoustica.
Powerful offline analysis tools are available, including spectrum, spectrogram and wavelet analysis. Real-time analyzers such as K-System level meters, phase correlation meters and spectrum analyzers allow you to monitor your audio output visually in real time during playback.
Youlean Freq-Balancer v2.0 (32bit Win)
What this plugin does:
Freq-Balancer analyzes the frequency content of an audio signal and automatically applies an equalizer that evens out the frequency balance towards a curve found on many commercial tracks. When Freq-Balancer analyses audio, it measures the audios frequency content over a period of time. It splits the incoming audio signal into 7 frequency bands. Then it measures and compares the audio levels within each band. Finally it applies EQ to compensate for any uneven frequency balance.
The Freq-Balancer is mainly designed for mastering, but it can be used when mixing down songs, as well on the separate tracks. It can be used for analyze purposes only, or for both analyzes and correction. It can be helpful if you don't have high quality studio monitors, or if your room has no acoustic treatment, and the tracks you produce tend to have uneven frequency response.
Tips for mastering:
For best detection you must find the loudest and busiest part in the mix and then click "Learn”. Try to avoid esses in vocals as it can make the result of analysis less accurate. To avoid it, you can loop part of the audio that doesn't contain esses. You will achieve best results if you insert this plugin after a compressor or limiter and then add the final master limiter after it, because too much dynamics could produce high spikes in some frequencies which will affect analysis. In most cases default settings will work well.
Before you do anything with the plugin, it is highly recommended to read the manual by clicking on the "Help" button.