Acustica Audio Ochre EQ v1.3.965 WIN/MAC
Soft / Audio Soft 27-08-2015
Acustica Audio Ochre EQ v1.3.965 WIN/MAC
Acustica is pleased to introduce Ochre "HOMEBREW" Eq, an EQ with 3 parametric bands, individually switchable. It’s the first plug-in of the HOMEBREW series, a new series of Acqua plug-ins with gorgeous graphical user interfaces that enable easy and quick parameter changes.

* Output slider control plug-in output gain.
* The PRE-IN button enables (lamp ON) or bypasses (lamp OFF) the preamp stage of Ochre q.
POWER button sets to bypass the plug-in or not-bypasses
* Input Trim: This knob sets the input level from -24dB to +24dB, and is used to control the signal level inside the eq, the output level is than automatically compensated by the same amount of gain. 
* At the first execution of the plug-in, input is set to ensure that you feed an appropriate level from the first stage of your signal path to the final one.
INPUT – OUTPUT VU METER measure the input (uppest position meter) and output (lowest position meter) levels of the plug-in.
* Each band is controlled independently by an identical set of controls; for Low Frequency ,Mid Frequency, High Frequency, each section has controls for:

Q: from 0.5 to 4
Frequency: Low band from 35 to 315 Hz;
Mid band from 315 to 2500 Hz;
High band from 2500 to 22000 Hz
Cut/Boost: +/-16dB;

home page:

http://www.acustica-audio.com
Related articles
Global Delight Boom 2 V. 1.3 MacOSX Cracked Global Delight Boom 2 V. 1.3 MacOSX Cracked
Soft / Audio Soft 18-09-2015
Boom 2 comes with a smart interface, self-calibrates itself according to your Mac, offers hands-on advanced equalizer controls for finer audio control and amazing audio effects for enhanced audio output. You get a personalized acoustic experience on your Mac so that your Boom 2 sounds like you. Unique.

Boom 2 is a Pro Audio App that:

• Auto-Calibrates itself according to the type of Mac
• Runs exclusively on Yosemite along with 64-bit compatibility
• Powerfully boosts volume on a system-wide level
• Fine-tunes any audio with advanced and precise equalizer controls
• Enhances quality of audio output with cool one-click audio effects
• Intelligently boosts the volume of file audio

Custom Audio Settings for A Personalized Experience: Every Mac is personal and contains its owner’s personality all over it. Boom 2 customizes the sound output according to YOUR Mac. It tailors the audio so that it sounds brilliant just like you.

Powerful System-Wide Volume Boosting: Boom 2 takes a measured approach to intelligently make everything coming out of your Mac’s speakers sound louder, clearer and better. You get to enjoy Spotify, iTunes, Netflix, YouTube and any other service like never before with Boom 2 making them come alive!

Precise & Advanced Equalizer Controls: Boom 2 takes it up a notch by giving you custom audio for every beat or bar that you hear. With a range of equalizer presets, choice between 10-band and advanced equalizers and additional Frequency Constrain controls, you can go all-out!

Presets and Custom Equalizers: Boom 2 gives you the freedom to choose from presets like Bass Boost, Acoustic, Pop, Treble etc. or to create your own ones.

Finer Equalizer Control: Boom 2 offers a range options for you to play around with in order to make your Mac’s audio sound brilliant. You can change any band or use the powerful Frequency Constrain feature to tweak every last bit out of the audio.

Enhanced Audio Quality with Cool One-Click Audio Effects: With just a click, these effects deliver an acoustic experience akin to actually being there when playing.

• Ambience Be alive and feel the music around you with Ambience. Hear notes from every single angle and corner, making it a live performance like no other.
• Fidelity Be here, there and everywhere with Fidelity. Listen to crisp and sharp tones while being surprised at how clear your Mac sounds!
Intelligent File Audio Boosting: Boom 2 can make media files sound much more louder and clearer for consumption elsewhere. It allows you to boost the volume & experience Boomin’ audio on other devices like Mobiles, MP3 Players, iTunes Sync and much more. It also intelligently recommends an optimal level to boost it up to!

PreSonus VU Meter v1.0.0.34268 for StudioOne-R2R PreSonus VU Meter v1.0.0.34268 for StudioOne-R2R
Soft / Audio Soft 9-09-2015
PreSonus have announced a cool little free plug-in PreSonus VU Meter.

The VU Meter plug-in provides the best of both worlds for your signal metering needs: Analog-style VU meters (with clip indicators), and LED-segment-style peak meters. VU meters are most useful for showing overall signal level, and peak meters (akin to the channel meters in the Studio One Console) are most useful for keeping track of peak signal levels. By referencing both of these, you can see a more nuanced picture of your signal—overall level and peak level.

A stereo correlation meter rounds out the trio, giving you insight into the left/right phase relationship of your signal.

This free standalone VU Meter plug-in is made from the same components used in the Channel Strip Collection.

One nice feature is that it offers pre fader metering. We also love the micro mode on each channel.
Acon Digital Equalize v1.1.12 WiN/MAC-UNION Acon Digital Equalize v1.1.12 WiN/MAC-UNION
Soft / Audio Soft 8-09-2015
Acon Digital Equalize is a parametric equalizer plug-in that combines unique features with excellent workflow and an intuitive user interface. Unlike other equalizers, you can freely adjust not only center frequency, gain and bandwidths, but also the filter slope for each band. The filter slope can be set anywhere from 3 dB to ultra-sharp 120 dB per octave. Needless to say, you can operate Equalize as a zero latency plug-in when using the minimum phase mode or choose to preserve the phase relationships in the linear phase mode. Equalize goes one step further, though, and introduces the unique mixed phase mode that allows you to set the latency freely in the range 5 to 120 milliseconds while preserving the phase relationships as far as possible. That gives a unique control over potential pre-ringing artifacts which is a common problem with linear phase filtering. Latency values below 20 milliseconds ensure that any pre-ringing is masked by the temporal masking of the human hearing while preserving the time-alignment across the audible frequency range.

New in Version 1.1.12

Fixed occasional CPU overloads in Pro Tools during audio scrubbing
Fixed problem with inactive gain knob in certain situations
Fixed problem with curve updates with disabled analyzers
Increased the maximum resonance to 24 dB
FabFilter Pro-C 2 v2.0.0 MacOSX-PiTcHsHiFTeR FabFilter Pro-C 2 v2.0.0 MacOSX-PiTcHsHiFTeR
Soft / Audio Soft 29-08-2015
FabFilter Pro-C 2 is a high-quality compressor plug-in for the most demanding engineers. Whether you need subtle mastering compression, an upfront lead vocal, that magic drum glue or deep EDM pumping: Pro-C 2 gets the job done with style

Everything you need

Pro-C 2 offers eight different, program-dependent compression styles with beautiful sound and character. But there's more! Apart from the classic compressor controls, you also get smooth lookahead, up to 4x oversampling, intelligent auto-gain and auto-release, a variable knee, hold, range, external side-chain triggering, variable stereo linking and mid/side processing, all packed in a beautiful Retina user interface.

Beautiful interface and optimized workflow

The fully redesigned interface in FabFilter Pro-C 2 offers insightful metering with real-time displays that will greatly improve workflow. The large animated level/knee display visualizes exactly when, why and how compression is applied to incoming audio. Accurate level meters show the exact peak and loudness values, while the circular side-chain input meter turns finding the perfect threshold setting into a trivial task. And the large side-chain EQ controller makes it easier than ever to filter the trigger signal any way you like

INSTRUCTIONS :
—Copy ked files to default directory
—Run your host load Pro-C 2 plugin
---for more readme.txt
—Have FUN !!!

If LPX need Run terminal.app 

sudo codesign -f -s - /Library/Audio/Plug-Ins/Components/FabFilter\ Pro-C\ 2.component/Contents/MacOS/FabFilter\ Pro-C\ 2

FabFilter Pro-C 2 v2.0.0 MacOSX-PiTcHsHiFTeR FabFilter Pro-C 2 v2.0.0 MacOSX-PiTcHsHiFTeR
Soft / Audio Soft 28-08-2015
FabFilter Pro-C 2 is a high-quality compressor plug-in for the most demanding engineers. Whether you need subtle mastering compression, an upfront lead vocal, that magic drum glue or deep EDM pumping: Pro-C 2 gets the job done with style

Everything you need

Pro-C 2 offers eight different, program-dependent compression styles with beautiful sound and character. But there's more! Apart from the classic compressor controls, you also get smooth lookahead, up to 4x oversampling, intelligent auto-gain and auto-release, a variable knee, hold, range, external side-chain triggering, variable stereo linking and mid/side processing, all packed in a beautiful Retina user interface.

Beautiful interface and optimized workflow

The fully redesigned interface in FabFilter Pro-C 2 offers insightful metering with real-time displays that will greatly improve workflow. The large animated level/knee display visualizes exactly when, why and how compression is applied to incoming audio. Accurate level meters show the exact peak and loudness values, while the circular side-chain input meter turns finding the perfect threshold setting into a trivial task. And the large side-chain EQ controller makes it easier than ever to filter the trigger signal any way you like

INSTRUCTIONS :
—Copy ked files to default directory
—Run your host load Pro-C 2 plugin
---for more readme.txt
—Have FUN !!!

If LPX need Run terminal.app 

sudo codesign -f -s - /Library/Audio/Plug-Ins/Components/FabFilter\ Pro-C\ 2.component/Contents/MacOS/FabFilter\ Pro-C\ 2
Sonic Charge Permut8 v1.1 MacOSX-PiTcHsHiFTeR Sonic Charge Permut8 v1.1 MacOSX-PiTcHsHiFTeR
Soft / Audio Soft 26-08-2015
Permut8 is an effect plug-in that embraces the sounds of primitive signal processing hardware. At its core is a 12-bit digital delay with variable sample rate from 0 to 352 khz. The delay is controlled by a programmable processor that allows you to change and modulate the delay time with various "operators". The input and output stages offers virtual analog components for saturation, limiting and filtering. The sound of Permut8 is raw and complex but noisy and warm at the same time

Modulate, Manipulate and Mangle
Permut8 is shipped with 11 "program banks" equalling a total of 320 presets covering a wide range of effects from traditional delays and flangers to beat-repeaters, bit-crushers and yet unheard of circuit bent madness. Use the player on the right to try some of the programs on top of a simple Microtonic beat.

Alternative Firmwares
Permut8 can be expanded with new functionality through so called "alternative firmwares". These firmwares are pieces of computer code that you load into Permut8 to extend or replace its signal processing algorithms. No complicated steps are necessary to "install" these firmwares. Simply load a special type of Permut8 Bank file into the plug-in and it will automatically activate the new signal processing code.

INSTRUCTIONS
—Install Permut8 v1.1
—Copy ked files to default dır’
—Have FUN!!
__________________________
P i T c H s H i F T e R